HexArmor® Hercules® 400R6E 360° cut- and puncture-resistant glove
The Hercules® 400R6E glove by HexArmor® is engineered to provide the highest levels of cut and puncture protection available on the market. The glove offers full coverage over the entire hand and most of the forearm for the most harsh applications.

General features

Includes SuperFabric®
Brand material to protect against hazards through a configuration of tiny guard plates layered onto performance fabrics – an exclusively licensed solution to HexArmor®
Pre-curved shape for all-day wear
Highest durability for long-lasting protection
Launderable
Safety features

Certified 4X34F according to EN 388:2016
High cut resistance available provided by two layers of SuperFabric® *brand material on palm (interior layer) and back-of-hand and two layers on the finger sidewalls
Industrial puncture protection from wires, metal, wood, and glass
Specialized silicone gripping surface on palm for enhanced durability and grip
Comfort features

Full coverage design and pre-curved shape for maximum comfort and ultimate protection

HexArmor® Helix® 3071: Fully coated knit glove offering 360° fluid resistance
The Helix® 3071 features a 13-gauge HPPE/steel mixed fabric shell that gives wearers 360° level A6 cut resistance and contact heat protection level 1. The wrinkle rubber palm coating on the palm provides superior grip and tactility while the fully coated natural foam latex offers 360° fluid resistance that extends to the knit wrist to keep out fluids and dirt.

General features

13-gauge HPPE/steel blend shell
Dense natural latex coating provides 360° water resistance
Roughened coating on the palm provides excellent grip and abrasion resistance
Ultimate dexterity and tactility
Maximum level of cut protection (cut level F)
Safety features

Certified according to EN 388 (4 X 4 3 F)
EN407 rated level 1 for contact heat
Excellent grip in wet areas thanks to the roughened coating on the palm
Launderable for extended life
Coated knit wrist helps prevent fluid and debris from entering the glove
Comfort features

Seamless construction for enhanced comfort and breathability
Fully coated, providing all-round protection against liquids
Application areas

Assembly
Service work
Sheet metal processing
Mechanical engineering and tool construction

HexArmor® Helix® 3023: Fully coated knit glove offering 360° fluid resistance
The Helix® 3023 features a 15-gauge HPPE, steel, fibreglass, and polyester blend shell with cut and abrasion resistance, all while offering breathable, lightweight wear. The PrimeFoam nitrile three-quarter palm coating delivers superior grip and abrasion resistance in dry or oily applications, complete with a reinforced thumb saddle for added durability.

General features

15-gauge HPPE, steel, fibreglass, polyester blend shell
PrimeFoam nitrile three-quarter palm and finger coating for increased grip and extreme abrasion resistance, level 6 abrasion resistance
Ultimate dexterity and tactility
Enhanced Touchscreen capabilities
Excellent grip in dry and oily conditions
Very high level of cut protection (cut level D)
Safety features

Certified according to EN 388 (4 X 4 3 D)
Extended protection on the fingers and back-of-hand
Reinforced thumb saddle
Launderable for extended life
Elastic knit wrist helps prevent dirt and debris from entering the glove
Comfort features

Seamless construction for enhanced comfort and breathability
Very high level of water resistance and flexibility
Application areas

Assembly
Service work
Sheet metal processing
Mechanical engineering and tool construction

uvex protector chemical NK2725B protection glove – for mechanical and chemical risks
The uvex protector family of safety gloves can easily overcome even the most complex challenges: the multi-layered structure of the material provides reliable cut protection and reliably guards the wearer against chemical and mechanical hazards.

General features

A very robust safety glove that uses multi-layer technology to combine impermeability with optimum cut protection
Length of gauntlet: approx. 27 cm
Colour: blue
Available in sizes: 9 to 10
AQL 1,5
Protection features

Certified in line EN 388:2016 (4 X 4 4 C) and EN ISO 374-1:2016/type A (J K N O P T)
Very high cut protection thanks to the multi-layered construction of the supporting material, which is made from cotton, HPPE and glass
Good resistance to grease, mineral oils and many chemicals
Good grip in damp, wet and oily areas
Comfort features

Good wearer comfort
Free from hazardous substances in accordance with OEKO-TEX® Standard 100
Areas of application

Work involving a high risk of cuts and contact with chemicals
Work involving high levels of mechanical strain
Sheet metal working
Machinery and tool construction

uvex profabutyl B-05R chemical protection glove made from 100% butyl rubber
Made from 100% butyl rubber, uvex profabutyl chemical protection gloves are mainly suitable for working with polar compounds such as esters or ketones.

General features

Chemical protection glove without stockinette made from butyl rubber
Seamlessly coated with bromobutyl (approx. 0.50 mm)
Colour: black
Available in sizes: 7 to 11
AQL 1,5
Protection features

Certified to EN 388:2016 (2 0 1 0 X), EN 16350:2014 and EN ISO 374-1:2016/Type A (A B I K L N O T)
Good grip in damp and wet areas
Good resistance to polar compounds such as esters, ketones, aldehydes, amines and saturated saline solutions, plus acids and alkalis
Comfort features

Good fit
Highly flexible
Applications

Safety glove without layer, suitable for working with chemicals in:

Chemical industry

uvex arc protect Arc Flash protection glove
When working with electrical equipment, hands are highly vulnerable to burns from short-circuit electric arcs. The uvex arc protect g1 protective glove offers reliable protection against the thermal discharge of such arcs. Made from flame-retardant modacrylic/cotton knit, these gloves safeguard the wearer from second-degree burns. For enhanced safety, they can be paired with the uvex power protect V1000 electrician's glove.

General features

High level of flexibility for comfort and an excellent tactile feel
Thermal protection
Certified in line with OEKO-TEX® Standard 100
Made in Germany
Protective glove made of modacrylic/cotton knit
Protective features

Short circuit electric arc class 1 according to EN 61482-1-2 (box test)
Thermal protection according to EN 407
Comfort features

Ergonomic fit
Excellent wearer comfort
Outstanding tactile feel
Excellent protection against thermal discharge

uvex power protect V1000 electrician's glove for electrical voltage up to 1000 V
When working with electrical equipment, the risk of electric shock is significant. The uvex power protect V1000 protective glove provides reliable protection against electrical voltages up to 1000 V. Made from highly insulating natural latex, these gloves shield the wearer from electrical discharges. Additionally, their flexible design ensures comfortable wear and excellent tactile sensitivity.

General features

The glove's high level of flexibility offers pleasant wearer comfort and an excellent tactile feel.
Protective features

EN 60903: 2003 IEC 60903: 2014 (Class 0/RC)
Comfort features

Anatomical fit
Flexible, with a good grip feel even at low temperatures
Flexible at cold temperatures
Mineral oil-resistant

uvex phynomic F XG cut protection glove (level F) with excellent grip and touchscreen function
Maximum level of cut protection in combination with the best grip in oily conditions in its class. The Xtra Grip coating ensures excellent grip in oily areas and a long service life of the glove. For increased sustainability and safety. uvex phynomic cut protection gloves come from our carbon-neutral production in Germany. They feel like a second skin, are sensitive and meet the highest requirements for protecting your health (proDERM®). Thanks to touchscreen compatibility with all common screens, tablets and mobile phones, there is no need to take off the uvex phynomic F XG.

General features

Lightweight and sensitive cut protection glove with the maximum cut protection level for mechanical activities in damp and oily areas
Aqua polymer Xtra Grip coating on the palm and fingertips
Touchscreen compatibility
The long service life of the glove reduces costs and waste
Excellent fit, feels like a second skin
Comfort features

Excellent tactile feel
High level of breathability due to the porous foam coating
Perfect fit due to slim-fit design and 3D-Ergo technology
Safety glove free of allergenic accelerators — dermatologically approved (proDERM®) health protection and skin compatibility
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (4 X 4 3 F), EN 407 (X 1 X X X X)
Excellent grip in oily, slightly damp and dry areas
Outstanding mechanical abrasion resistance of the aqua polymer Xtra Grip coating
Very high level of cut protection and high tear resistance due to the optimal material composition
No need to remove the glove thanks to touchscreen compatibility
Protection against contact heat up to 100°C
Application areas

Cut protection (cut level F) for assembling and handling parts with very sharp edges
Metalworking and glass processing
Inspection
Food processing
Sorting
Packaging
Working on industrial screens, tablets and mobile phones
Maintenance and service work
Sustainability

Carbon footprint: 0.76 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.57 kg CO₂ eq
Carbon footprint of transportation: 0.03 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex phynomic C XG ESD cut protective glove (cut level C) with ESD and touchscreen functions
The best grip in oily conditions in its class. The Xtra Grip coating ensures excellent grip in oily areas and a long service life of the glove. For increased sustainability and safety. In addition, the phynomic C XG ESD features ESD capability. uvex phynomic cut protection gloves come from our carbon-neutral production in Germany. They feel like a second skin, are sensitive and meet the highest requirements for protecting your health (proDERM®). Thanks to touchscreen compatibility with all common screens, tablets and mobile phones, there is no need to take off the uvex phynomic C XG ESD.

General features

Lightweight and sensitive glove with a high level of cut protection and ESD function for mechanical activities in damp and oily areas
Aqua polymer Xtra Grip coating on the palm and fingertips
Touchscreen compatibility
The long service life of the glove reduces costs and waste
Excellent fit, feels like a second skin
Comfort features

Excellent tactile feel
High level of breathability due to the porous foam coating
Perfect fit due to slim-fit design and 3D-Ergo technology
Safety glove free of allergenic accelerators — dermatologically approved (proDERM®) health protection and skin compatibility
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (3 X 4 2 C), DIN EN 16350:2014
ESD function protects workpieces against electrostatic discharge
Suitable in potentially explosive atmospheres
Excellent grip in oily, slightly damp and dry areas
Outstanding mechanical abrasion resistance of the aqua polymer Xtra Grip coating
High level of cut protection and high tear resistance due to the optimal material composition
No need to remove the glove thanks to touchscreen compatibility
Application areas

Cut protection (cut level C) and ESD protection for assembling and handling parts with sharp edges
Fine assembly work
Precision work
Inspection
Sorting
Packaging
Working on industrial screens, tablets and mobile phones
Maintenance and service work

uvex phynomic C XG cut protection glove (cut level C) with excellent grip in oily conditions and touchscreen function
The best grip in oily conditions in its class. The Xtra Grip coating ensures excellent grip in oily areas and a long service life of the glove. For increased sustainability and safety. uvex phynomic cut protection gloves come from our carbon-neutral production in Germany. They feel like a second skin, are sensitive and meet the highest requirements for protecting your health (proDERM®). Thanks to touchscreen compatibility with all common screens, tablets and mobile phones, there is no need to take off the uvex phynomic C XG.

General features

Lightweight and sensitive glove with a high level of cut protection for mechanical activities in damp and oily areas
Aqua polymer Xtra Grip coating on the palm and fingertips
Touchscreen compatibility
The long service life of the glove reduces costs and waste
Excellent fit, feels like a second skin
Comfort features

Excellent tactile feel
High level of breathability due to the porous foam coating
Perfect fit due to slim-fit design and 3D-Ergo technology
Safety glove free of allergenic accelerators — dermatologically approved (proDERM®) health protection and skin compatibility
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (4 X 4 2 C)
Excellent grip in oily, slightly damp and dry areas
Outstanding mechanical abrasion resistance of the aqua polymer Xtra Grip coating
High level of cut protection and high tear resistance due to the optimal material composition
No need to remove the glove thanks to touchscreen compatibility
Application areas

Cut protection (cut level C) for assembling and handling parts with very sharp edges
Fine assembly work
Precision work
Inspection
Sorting
Packaging
Working on industrial screens, tablets and mobile phones
Maintenance and service work

uvex profi pure HG — innovative safety glove with outstanding grip in wet conditions
Unrivalled grip in wet conditions. The innovative Hydro-Grip special polymer coating sets a completely new benchmark. This waterproof glove offers increased grip in wet and damp working areas, both indoors and outdoors. Thanks to the cotton fibre on the inside of the glove, your skin will also stay dry all day long. In addition, the uvex profi pure HG is produced at our carbon-neutral site in Germany and is proDERM®-certified.

General features

Waterproof safety glove with innovative uvex Hydro-Grip technology
Unique grip in wet working areas
Coating on the palm and entire back of the hand
Comfort fit, high level of wearer comfort thanks to cotton on the skin
Comfort features

Very high level of wearer comfort thanks to the high level of moisture absorption of the cotton lining
Ergonomic fit
High level of flexibility
Dermatologically approved health protection and skin compatibility (proDERM®)
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (2 1 2 1 X), EN 407 (X 1 X X X X)
Excellent grip in wet areas thanks to the innovative Hydro-Grip special coating
Protection against contact heat up to 100°C
Application areas

Working in outdoor areas
Installation of water pipes, drainage systems
Working outdoors
Concrete and construction work
Scaffolding
Manual handling, service work

SPECIFICATIONS
Soft leather hand and fingers
Thicker suede leather cuff
Size 10
Thermal rating: 4.1.3.X.4.X. EN12477, Type A EN388
Manufactured to: EN ISO 21420, EN12477, EN407, EN388
Mechanical hazard rating: 2.1.1.1

Technical specification
Type
Welding Gauntlet
Pairs
1
Size
10
Packaged Weight
0.17kg

SPECIFICATIONS
Fully cotton lined interior
Suede leather exterior
Size 10
Thermal rating: 4.1.3.1.4.X EN12477, Type A EN388
Manufactured to: EN ISO 21420, EN12477, EN407, EN388
Mechanical hazard rating: 4.1.4.4

Product description
Fully cotton lined interior with a suede leather exterior, These thick WG10A leather gloves provide comfort as well as impact and heat protection whilst welding.

Technical specification
Type
Welding Gauntlet
Size
10
Pairs
1
Packaged Weight
0.39kg

Reusable Full Face Mask Respirator with A2P3 Filters
Twin-filter design provides even distribution of weight\nwith minimal obstruction to field of vision.
All parts of respirator are fully replaceable making it easy to maintain.A2P3 Filtration provides 99.95% filtration of airborne particles at 0.3 micron and above.
Protection against gases and vapours from organic compounds with a boiling point above 65°C, as well as solid and liquid particles, toxic and radioactive particles, and micro-organisms.
Assigned Protection Factor of APF20, can be used with contaminant concentrations up to 20 times the workplace exposure limit (WEL).
Includes
(1) Pair of A2P3 Filters

FFP3 Disposable Particulate Respirator
Front exhalation valve reduces breathing resistance for greater comfort.
Preformed nose bridge removes the need for regular adjustment.FFP3 filtration provides 99% filtration of airborne particles at 0.3 micron and above.
Dolomite-tested rating ensures the mask can be worn over a long period, even at high levels of dust concentration.
Assigned Protection Factor of APF20, can be used with contaminant concentrations up to 20 times the workplace exposure limit (WEL).

Pack of 10 fold flat masks class FFP1 NR.
Protects against non-toxic dusts and water-based aerosols.
Fitted with adjustable band, nose liner and aluminium nose clip to fit all face contours.
Filter Efficiency ≥ 80%
Manufactured to BS EN 149:2001+A1:2009.
Note: Before commencing with any task, please consult with qualified safety personnel, or carry out your own risk assessment, to ensure that the face mask type and rating offers adequate protection for your intended use. You may need to use this mask in conjunction with other safety equipment. These are particulate filters only, and do not provide protection from harmful fumes or gases.

Nett Weight:
0.08kg

Qty:
10

Pack of 10 cup masks class FFP1 NR.
Protects against non-toxic dusts and water-based aerosols.
Fitted with nose liner and aluminium nose clip to fit all face contours.
Also fitted with breathing vent to provide more comfort and better communication as well as reducing heat build-up.
Filter Efficiency ≥ 80%.
Manufactured to BS EN 149:2001 + A1:2009.
Note: Before commencing with any task, please consult with qualified safety personnel, or carry out your own risk assessment, to ensure that the face mask type and rating offers adequate protection for your intended use. You may need to use this mask in conjunction with other safety equipment. These are particulate filters only, and do not provide protection from harmful fumes or gases.

Nett Weight:
0.120kg

Qty:
10

Available in four colours.
Widely accepted colour-coding indicates Black = Supervisor/Foreman.
Vented for user comfort.
Hearing and face shield accessories available.
Ratchet suspension harness.
Pop, twist and lock fitting system prevents unintentional loosening of headband.
Material webbing cradle rather than rigid plastic means greater comfort when wearing all day.
Conforms to BS EN397.

Colour:
Black

Nett Weight:
0.41kg

Optional Accessories:
220 - Face Shield, 405 - Clip-On Ear Defenders, 503 - Helmet Chin Strap

Ultra-thin, durable insulated gloves: reliable protection up to 1000V.

Important:
Before use, always ensure that the gloves have no tears. Even a small cut may affect the safety of the insulating gloves.

uvex silv-Air c 2312 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering preformed mask with exhalation valve – ergonomically adapted for smaller faces
Colour: white
Protection features

Certified FFP3 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF): 20
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Four-point headband attachment and flexible, adjustable nose clip for a comfortable, secure fit
Very soft, all-around sealing lip for optimal wearer comfort and secure fit
Exhalation valve to lessen exhalation resistance and to reduce heat and moisture inside the mask
Ergonomically adjusted cup size especially suitable for narrower faces

uvex silv-Air c 2310 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering preformed mask with exhalation valve
Colour: white
Protection features

Certified FFP3 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF): 20
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Four-point headband attachment and flexible, adjustable nose clip for a comfortable, secure fit
Very soft, all-around sealing lip for optimal wearer comfort and secure fit
Exhalation valve to lessen exhalation resistance and to reduce heat and moisture inside the mask
Sustainability

Carbon footprint: 0.21 kg CO₂ eq
Carbon footprint of production: 0.05 kg CO₂ eq
Carbon footprint of materials: 0.12 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.02 kg CO₂ eq
CO₂ - time of calculation: 05/2023
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex silv-Air c 3310 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic, pure-white folding and cup-shaped face masks designed to fit different face shapes. Headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering folding mask with exhalation valve
Colour: white
Protection features

Certified FFP3 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF): 20
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Adjustable headband and flexible, adjustable nose clip for a comfortable, secure fit
Soft material edges for high wearing comfort
Exhalation valve reduces breathing resistance and build-up of heat and moisture in the mask
Flexible and adjustable nose clip
Compatible with uvex safety eyewear

uvex silv-Air c 2220 – excellent handling, top-class comfort, reliable protection against odours
The uvex silv-Air c product family consists of classic, pure-white folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering preformed mask with exhalation valve
Colour: silver
Protection features

Certified FFP2 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF): 10
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Additional activated carbon filter against odours, gases and vapours below threshold
Comfort features

Seamless headband and flexible, adjustable nose clip for a comfortable, secure fit
Comfortable sealing lip in the nose area for secure fit
Exhalation valve to lessen exhalation resistance and to reduce heat and moisture inside the mask

uvex silv-Air c 2200 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic, pure-white folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering preformed mask
Colour: white
Protection features

Certified FFP2 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF): 10
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Seamless headband and flexible, adjustable nose clip for a comfortable, secure fit
Comfortable sealing lip in nose area for secure fit

uvex silv-Air c 3220 – easy to use, top-class comfort, reliable protection against odours
The uvex silv-Air c product family consists of classic, pure-white folding and cup-shaped face masks designed to fit different face shapes. The headband strap and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Colour: silver
Protective features

FFP2 mask certified in accordance with EN 149:2001+A1:2009
Assigned Protection Factor (APF): 10
“D” symbol (mask has passed the dolomite dust test): breathe easy even at high levels of dust exposure
Not reusable
Additional activated carbon filter against odours, gases and vapours below threshold values
Comfort features

Seamless headband and flexible, adjustable nose clip
Comfortable sealing lip in nose area for secure fit
Exhalation valve to reduce breathing resistance and minimise heat and moisture build-up inside the mask

uvex silv-Air c 3210 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering folding mask with exhalation valve
Colour: white
Protection features

Certified FFP2 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF): 10
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Seamless headband and flexible, adjustable nose clip
Comfortable sealing lip in nose area for secure fit
Exhalation valve to lessen exhalation resistance and to reduce heat and moisture inside the mask

uvex silv-Air c 3200 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering folding mask
Colour: white
Protection features

Certified FFP2 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF) 10
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Seamless headband and flexible, adjustable nose clip
Comfortable sealing lip in nose area for secure fit

uvex silv-Air c 2110 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering preformed mask with exhalation valve
Colour: white
Protection features

Certified FFP1 face mask to EN 149
Assigned Protection Factor (APF) 4
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Seamless headband and nose clip for a comfortable, secure fit
Comfortable sealing lip in nose area for secure fit
Exhalation valve to lessen exhalation resistance and to reduce heat and moisture inside the mask

uvex silv-Air c 3110 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering folding mask with exhalation valve
Colour: white
Protection features

Certified FFP1 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF) 4
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Comfortable sealing lip in nose area for secure fit
Seamless headband and flexible, adjustable nose clip
Exhalation valve to lessen exhalation resistance and to reduce heat and moisture inside the mask

uvex silv-Air c 3100 – excellent handling, top-class comfort
The uvex silv-Air c product family consists of classic folding and cup-shaped face masks designed to fit different face shapes. The headband lacing system and integrated sealing lips in all protection classes make it easy to fit these masks correctly – and to wear them comfortably for long periods.

General features

Particle-filtering folding mask
Colour: white
Protection features

Certified FFP1 face mask to EN 149:2001+A1:2009
Assigned Protection Factor (APF) 4
D label (dolomite dust test passed): maximum breathability even with really high dust levels
Cannot be reused
Comfort features

Seamless headband and flexible, adjustable nose clip
Comfortable sealing lip in nose area for secure fit

uvex pheos K2P magnet – extra-soft earmuff padding for the uvex pheos helmet system
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Magnetic helmet connection for combining with uvex pheos helmet system
Compatible with the uvex pheos visor 9906 (item no.: 9906003, 9906006, 9906008)
Colour: black, yellow
Version helmet earmuffs for the uvex pheos helmet system
Protection features

Meets standard EN 352-3
30 decibels insulation – H: 35 dB, M: 27 dB, L: 20 dB
Comfort features

Wearer comfort guaranteed thanks to extra-soft memory foam ear cushions, even when worn for long periods
360° rotation for standby and resting positions

uvex pheos K2P – extra-soft earmuff padding for the uvex pheos helmet system
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Mechanical helmet connection for combining with uvex pheos helmet system
Compatible with the uvex pheos visor 9906 (item no.: 9906002, 9906005, 9906007)
Colour: black, yellow
Version helmet earmuffs for the uvex pheos helmet system
Protection features

Meets standard EN 352-3
30 decibels insulation – H: 35 dB, M: 27 dB, L: 20 dB
Comfort features

Wearer comfort guaranteed thanks to extra-soft memory foam ear cushions, even when worn for long periods
360° rotation for standby and resting positions

uvex k-series – maximum protection combined with perfect design
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Ear muffs with length adjustment
Low weight and compact size
Colour: yellow
Version with length adjustment
Protection features

Meets standard EN 352-1
35 decibels insulation – H: 38 dB, M: 33 dB, L: 24 dB
Higher insulation in high-frequency range
Comfort features

Easily adjustable for a perfect fit
Padded headband for optimal wearer comfort
Wearer comfort guaranteed thanks to extra-soft memory foam ear cushions, even when worn for long periods

uvex K30H – dielectric helmet earmuffs with Euroslot connection
uvex K30H are dielectric earmuffs that can be directly attached to helmets with a 30 mm Euroslot. Combined with the uvex pheos E helmet, the plastic arm ensures safety during electrical work. The length of the soft arm can be adjusted to ensure perfect positioning. The earmuffs can be quickly and easily moved into the operating, standby and resting positions with a rotate-and-swivel motion. The memory foam sealing pads create an excellent seal and fit around the head. If using the earmuffs in applications with high hygiene requirements, we recommend using the hygiene kit, article no. 259997. Regularly changing the sealing pads provides a secure seal and extends the service life of the earmuffs.

General features

Dielectric helmet earmuffs
Continuous length adjustment
Sound isolation thanks to the rubber-cushioned earmuffs
Operating/standby and resting positions
Replaceable earmuff cushions for applications with high hygiene requirements
Cushioned sealing pads with memory foam create an excellent seal and fit around the head
Colour: black, red
Protection features

Meets standard EN 352-3
34 dB noise reduction – H: 32 dB, M: 32 dB, L: 24 dB
Comfort features

Optimal earmuff shape provides pressure-free protection for the outer ear
Extra-soft memory foam ear cushions ensure optimal wearer comfort, even when worn for long periods
Quickly and easily move the earmuffs into the operating, standby or resting position

uvex k-series – maximum protection combined with perfect design
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Ear muffs with length adjustment
Low weight and compact size
Colour: black, red
Version with length adjustment
Protection features

Meets standard EN 352-1
33 decibels insulation – H: 36 dB, M: 30 dB, L: 22 dB
Higher insulation in high-frequency range
Comfort features

Easily adjustable for a perfect fit
Padded headband for optimal wearer comfort
Wearer comfort guaranteed thanks to extra-soft memory foam ear cushions, even when worn for long periods

uvex K20H – dielectric helmet earmuffs with Euroslot connection
uvex K20H are dielectric earmuffs that can be directly attached to helmets with a 30 mm Euroslot. Combined with the uvex pheos E helmet, the new plastic arm ensures safety during electrical work. The length of the soft arm can be adjusted to ensure perfect positioning. The earmuffs can be quickly and easily moved into the operating, standby and resting positions with a rotate-and-swivel motion. The memory foam sealing pads create an excellent seal and fit around the head. If using the earmuffs in applications with high hygiene requirements, we recommend using the hygiene kit, article no. 259997. Regularly changing the sealing pads provides a secure seal and extends the service life of the earmuffs.

General features

Dielectric helmet earmuffs
Continuous length adjustment
Sound isolation thanks to the rubber-cushioned earmuffs
Operating/standby and resting positions
Replaceable earmuff cushions for applications with high hygiene requirements
Cushioned sealing pads with memory foam create an excellent seal and fit around the head
Colour: black, yellow
Protection features

Meets standard EN 352-3
30 dB noise reduction – H: 34 dB, M: 28 dB, L: 20 dB
Comfort features

Optimal earmuff shape provides pressure-free protection for the outer ear
Extra-soft memory foam ear cushions ensure optimal wearer comfort, even when worn for long periods
Quickly and easily move the earmuffs into the operating, standby or resting position

uvex K2H – comfortable helmet earmuffs with a fresh design
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Earmuffs, ideal for combining with helmet and visor
Suitable for all uvex safety helmets: uvex pheos B-WR, uvex pheos alpine, uvex airwing, uvex superboss (additional adapter systems for combination available on request)
Colour: black, yellow
Version helmet earmuffs
Protection features

Meets standard EN 352-3
30 decibels insulation – H: 35 dB, M: 27 dB, L: 20 dB
Length is easily adjustable for a perfect fit on the helmet
Comfort features

Wearer comfort guaranteed thanks to extra-soft memory foam ear cushions, even when worn for long periods
360° rotation for standby and resting positions

uvex k-series – maximum protection combined with perfect design
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Ear muffs with length adjustment
Low weight and compact size
Colour: black, yellow
Version with length adjustment
Foldable for easy storage
Protection features

Meets standard EN 352-1
32 decibels insulation – H: 37 dB, M: 29 dB, L: 21 dB
Comfort features

Easily adjustable for a perfect fit
Padded headband for optimal wearer comfort
Wearer comfort guaranteed thanks to extra-soft memory foam ear cushions, even when worn for long periods

uvex K10H – dielectric helmet earmuffs with Euroslot connection
uvex K10H are dielectric earmuffs that can be directly attached to helmets with a 30 mm Euroslot. Combined with the uvex pheos E helmet, the plastic arm ensures safety during electrical work. The length of the soft arm can be adjusted to ensure perfect positioning. The earmuffs can be quickly and easily moved into the operating, standby and resting positions with a rotate-and-swivel motion. The memory foam sealing pads create an excellent seal and fit around the head. If using the earmuffs in applications with high hygiene requirements, we recommend using the hygiene kit, article no. 259997. Regularly changing the sealing pads provides a secure seal and extends the service life of the earmuffs.

General features

Dielectric helmet earmuffs
Continuous length adjustment
Sound isolation thanks to the rubber-cushioned earmuffs
Operating/standby and resting positions
Replaceable earmuff cushions for applications with high hygiene requirements
Cushioned sealing pads with memory foam create an excellent seal and fit around the head
Colour: black, green
Protection features

Meets standard EN 352-3
28 dB noise reduction – H: 34 dB, M: 26 dB, L: 18 dB
Comfort features

Optimal earmuff shape provides pressure-free protection for the outer ear
Extra-soft memory foam ear cushions ensure optimal wearer comfort, even when worn for long periods
Quickly and easily move the earmuffs into the operating, standby or resting position

uvex K1H – comfortable helmet earmuffs with a fresh design
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Helmet earmuffs, ideal for combining with helmet and visor
Suitable for all uvex safety helmets: uvex pheos B-WR, uvex alpine, uvex airwing, uvex superboss (additional adapter systems for combination available on request)
Colour: black, green
Protection features

Meets standard EN 352-3
27 decibels insulation – H: 32 dB, M: 24 dB, L: 17 dB
Length is easily adjustable for a perfect fit on the helmet
Comfort features

Soft ear cushions adapt to surface and head shape to ensure optimal wearer comfort
360° rotation for standby and resting positions

uvex k-series – maximum protection combined with perfect design
The uvex K protective earmuffs offer an impressive combination of high levels of protection combined with great design: Thanks to their soft surfaces, the earmuffs are easy to mould and comfortable to wear due to their low weight.

General features

Ear muffs with length adjustment
Low weight and compact size
Colour: black, green
Version with length adjustment
Foldable for easy storage
Protection features

Meets standard EN 352-1
28 decibels insulation – H: 35 dB, M: 24 dB, L: 17 dB
Comfort features

Easily adjustable for a perfect fit
Soft surface and padded headband for optimal wearer comfort

uvex hearing protection accessories: dispenser "one 2 click"
Easy-to-use, robust wall-mounted dispenser. Easy installation and a controlled release mechanism which ensures the correct number of plugs are dispensed. The audible "one 2 click" system prevents over supply.

General features

Easy-to-use, robust wall-mounted dispenser
Simple click mechanism prevents over supply of plugs
Transparent design makes it easy to monitor the number of earplugs remaining
Collecting tray catches the earplugs
Accessories available

2124003: uvex xact-fit replacement pods in bulk. For use with uvex dispenser 2112000
2124013: uvex xact-fit detec replacement pods in bulk. Refill box for use with uvex dispenser 2112000

uvex x-cap – comfortable, ergonomic banded ear protection
Its innovative design guarantees a comfortable fit thanks to unique, oval-design, soft foam earplugs. This banded ear protection is ergonomically formed and reduces the transmission of annoying noises by preventing the band from rubbing against clothing.

General features

Ergonomically shaped banded ear protector for optimal positioning in front of the chin
Colour: grey, sky blue, lime
Version with band
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
23 decibels insulation – H: 27 dB, M: 19 dB, L: 18 dB
Comfort features

Ergonomically shaped replacement earplugs for optimal wearer comfort
Available variants

2125361: 15 per box
2125351: uvex x-cap replacement pods, bagged in 5 pairs in zip-top polythene bag

uvex xact-fit reusable detectable – corded reusable earplugs in two sizes
These innovative earplugs are easily detectable, both visually and by machines, thanks to the striking blue colour and metal clip. The unique oval design mimics the ear canal's natural shape for a low-pressure fit. The angled pin – based on the shape of the ear canal – significantly reduces pressure in the ear. This combination ensures that the earplugs are comfortable to wear even during extended use. The pre-formed pins, labelled left and right, make it easier to insert and remove the earplugs, even when wearing gloves. The uvex xact-fit reusable detectable is available in two sizes, S and M/L.

General features

Easy-to-clean, reusable detectable corded earplugs
Integrated metal clip and the blue colour ensure the earplugs can be detected in a production environment
Smooth, dirt-repellent surface can be easily cleaned using mild soap and water
Colour: blue
Available in two sizes (S and M/L)
Supplied in mini cardboard box
With adjustable cord
Protective features

Meets standard EN 352-2
26 decibel noise reduction – H: 27 dB, M: 23 dB, L: 22 dB
Medium protection capacity allows for excellent speech and signal recognition for easy communication
No rolling required making them ideal for people wearing gloves or dirty environments
Comfort features

Thumb indentations enable hygienic, quick and easy handling
Oval-shaped earplugs mimics the natural shape of the ear canal for optimum fit and comfort
Available in two sizes, ensures optimal fitting of most ear canals
Thanks to the cord, the earplugs are always convenient to hand – in low-noise areas, the earplugs can be worn comfortably around the neck
Areas of application

Can be handled with dirty hands or while wearing gloves.
Ideal for variable environments
Wearing time reusable plugs: maximal 4 weeks

uvex xact-fit reusable detectable – corded reusable earplugs in two sizes
These innovative earplugs are easily detectable, both visually and by machines, thanks to the striking blue colour and metal clip. The unique oval design mimics the ear canal's natural shape for a low-pressure fit. The angled pin – based on the shape of the ear canal – significantly reduces pressure in the ear. This combination ensures that the earplugs are comfortable to wear even during extended use. The pre-formed pins, labelled left and right, make it easier to insert and remove the earplugs, even when wearing gloves. The uvex xact-fit reusable detectable is available in two sizes, S and M/L and comes with a plastic box for hygienic storage.

General features

Easy-to-clean, reusable detectable corded earplugs
Integrated metal clip and the blue colour ensure the earplugs can be detected in a production environment
Smooth, dirt-repellent surface can be easily cleaned using mild soap and water
Colour: blue
Available in two sizes (S and M/L)
Earplug box for hygienic storage when not in use
With adjustable cord
Protective features

Meets standard EN 352-2
26 decibel noise reduction – H: 27 dB, M: 23 dB, L: 22 dB
Medium protection capacity allows for excellent speech and signal recognition for easy communication
No rolling required making them ideal for people wearing gloves or dirty environments
Comfort features

Thumb indentations enable hygienic, quick and easy handling
Oval-shaped earplugs mimics the natural shape of the ear canal for optimum fit and comfort
Available in two sizes, ensures optimal fitting of most ear canals
Thanks to the cord, the earplugs are always convenient to hand – in low-noise areas, the earplugs can be worn comfortably around the neck
Areas of application

Can be handled with dirty hands or while wearing gloves.
Ideal for variable environments
Wearing time reusable plugs: maximal 4 weeks
Versions available

2224029: Size S in cardboard box
2224030: Size M/L in cardboard box
2224027: Size S in plastic hygiene box
2224028: Size M/L in plastic hygiene box

uvex whisper detec – easy-to-clean reusable earplugs with extra comfort
Earplugs are often used in dirty work environments. This means that particles can easily stick to the surface of materials and cause minor injuries to the wearer's ears. The smooth and dirt-repellent surfaces of the uvex whisper earplugs can easily be cleaned with soap and water. This increases wearer comfort and safety for the user. The uvex whisper detec is easily detectable, both visually and by machines, thanks to its striking blue colour and metal ball.

General features

Easy-to-clean reusable, detectable earplugs with cord
Smooth, dirt-repellent surface can be easily cleaned using soap and water
With card mini box for storage
Colour: blue
Version with cord
Safety features

Meets standard EN 352-2 and the additional requirements "Signal hearing in railway track superstructure construction" (S), "Signal hearing in road traffic" (V), "Warning signal hearing, general" (W) and "Signal hearing for locomotive drivers in railway operations" (E1)
22 decibels insulation – H: 23 dB, M: 19 dB, L: 17 dB
Integrated metal parts and blue colour enable easy recognition in production areas
Comfort features

With the cord, the earplugs are always conveniently at hand – in low-noise areas, the earplugs can be worn comfortably around the neck

uvex x-fit detec – maximum insulation, optimum comfort
The ergonomically pre-shaped uvex x-fit disposable earplugs provide very strong insulation and are suitable for use in extremely loud environments. The soft foam of the earplugs provides a high level of comfort, even when worn for extended periods. The detec version of the uvex x-fit is easily detectable, both visually and by machines, thanks to its striking blue colour and metal ball.

General features

Ergonomically pre-shaped, detectable disposable earplugs
Colour: blue
With cord
Safety features

Meets standard EN 352-2 and the additional requirements "Signal hearing in railway track superstructure construction" (S), "Signal hearing in road traffic" (V), "Warning signal hearing, general" (W) and "Signal hearing for locomotive drivers in railway operations" (E1)
37 decibels insulation – H: 36 dB, M: 34 dB, L: 34 dB
Suitable for use in extremely loud environments
Integrated metal parts and blue colour enable easy recognition in production areas
Comfort features

Patented x-grip technology reduces contact pressure in the ear canal and makes it significantly easier to remove the earplug
Sustainability

Carbon footprint: 0.014 kg CO₂ eq
Carbon footprint of production: 0.000 kg CO₂ eq
Carbon footprint of materials: 0.010 kg CO₂ eq
Carbon footprint of transportation: 0.001 kg CO₂ eq
Carbon footprint of packaging: 0.003 kg CO₂ eq
CO₂ - time of calculation: 06/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex hi-com detec – cuts out noise, lets in speech
The innovative shape of the uvex hi-com earplugs reduces the level of sound that normally builds up in the inner ear when wearing hearing protection. Integrated cavities result in a larger surface area in the direction of the eardrum. The earplugs provide softer acoustics and absorb disruptive noises – they also allow excellent speech perception. The detec version of the uvex hi-com is easily detectable, both visually and by machines, thanks to its striking blue colour and metal ball.

General features

Detectable earplugs with low sound absorption and excellent speech perception
Colour: blue
Version with cord
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
26 decibels insulation – H: 30 dB, M: 23 dB, L: 18 dB
Integration of metal and blue colour enable easy recognition in production areas
Metal powder in the cord guarantees full detection
Comfort features

Reduces level of sound that can build up in the inner ear when wearing hearing protection

uvex whisper+ detec – easy-to-clean reusable earplugs with extra comfort
Earplugs are often used in dirty work environments. This means that particles can easily stick to the surface of materials and cause minor injuries to the wearer's ears. The smooth and dirt-repellent surfaces of the uvex whisper, whisper+ and whisper supreme earplugs can easily be cleaned with soap and water. This increases wearer comfort and safety for the user. The detec version of the uvex whisper+ is easily detectable, both visually and by machines, thanks to its striking blue colour and metal ball.

General features

Easy-to-clean reusable, detectable earplugs with cord
Smooth, dirt-repellent surface can be easily cleaned using soap and water
Hygienic storage of earplugs in hygiene box
Colour: blue
Version with cord
Safety features

Meets standard EN 352-2 and the additional requirements "Signal hearing in railway track superstructure construction" (S), "Signal hearing in road traffic" (V), "Warning signal hearing, general" (W) and "Signal hearing for locomotive drivers in railway operations" (E1)
27 decibels insulation – H: 27 dB, M: 24 dB, L: 22 dB
Integrated metal parts and blue colour enable easy recognition in production areas
Comfort features

With the cord, the earplugs are always conveniently at hand – in low-noise areas, the earplugs can be worn comfortably around the neck
Sustainability

Carbon footprint: 0.029 kg CO₂ eq
Carbon footprint of production: 0.001 kg CO₂ eq
Carbon footprint of materials: 0.009 kg CO₂ eq
Carbon footprint of transportation: 0.002 kg CO₂ eq
Carbon footprint of packaging: 0.017 kg CO₂ eq
CO₂ - time of calculation: 07/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex xact-fit detec – a new dimension in detectable earplugs
These innovative earplugs adapt perfectly to the human ear. The uvex xact-fit features a novel design based on the anatomy of the ear canal. This noticeably reduces pressure on the ear canal – even when worn for extended periods. The detec version of the uvex xact-fit is easily detectable, both visually and by machines, thanks to its striking blue colour and metal ball.

General features

Detectable disposable earplugs with thumb indentations
Replacement earplugs can be stored in dispenser
Colour: blue
Version with reusable pin
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
26 decibels insulation – H: 28 dB, M: 23 dB, L: 19 dB
Adapts perfectly to the shape and size of the ear canal, thereby minimising leakages for perfect adjustment and optimal protection
Integrated metal parts and blue colour enable easy recognition in production areas
Comfort features

Thumb indentations for quick and easy handling
Shape recreates the anatomy of the human ear – ensuring a comfortable fit at all times
Soft replacement earplugs guarantee optimal wearer comfort
Available Variants

2124011: 50 pairs, corded
2124012: replacement pods, 250 pairs (5 pairs per box)

uvex whisper+ – easy-to-clean reusable earplugs with extra comfort
Earplugs are often used in dirty work environments. This means that particles can easily stick to the surface of materials and cause minor injuries to the wearer's ears. The smooth and dirt-repellent surfaces of the uvex whisper, whisper+ and whisper supreme earplugs can easily be cleaned with soap and water. This increases wearer comfort and safety for the user.

General features

Easy-to-clean reusable earplugs with cord
Smooth, dirt-repellent surface can be easily cleaned using soap and water
Hygienic storage of earplugs in hygiene box
Colour: lime
Version with cord
Protection features

Meets standard EN 352-2 and the additional requirements "Signal hearing in railway track superstructure construction" (S), "Signal hearing in road traffic" (V), "Warning signal hearing, general" (W) and "Signal hearing for locomotive drivers in railway operations" (E)
27 decibels insulation – H: 27 dB, M: 24 dB, L: 22 dB
Comfort features

Thanks to the cord, the earplugs are always conveniently at hand – in low-noise areas, the earplugs can be worn comfortably around the neck

uvex whisper+ – easy-to-clean reusable earplugs with extra comfort
Earplugs are often used in dirty work environments. This means that particles can easily stick to the surface of materials and cause minor injuries to the wearer's ears. The smooth and dirt-repellent surfaces of the uvex whisper, whisper+ and whisper supreme earplugs can easily be cleaned with soap and water. This increases wearer comfort and safety for the user.

General features

Easy-to-clean reusable earplugs with cord
Smooth, dirt-repellent surface can be easily cleaned using soap and water
Hygienic storage of earplugs in hygiene box
Colour: lime
Version with cord
Protection features

Meets standard EN 352-2 and the additional requirements "Signal hearing in railway track superstructure construction" (S), "Signal hearing in road traffic" (V), "Warning signal hearing, general" (W) and "Signal hearing for locomotive drivers in railway operations" (E)
27 decibels insulation – H: 27 dB, M: 24 dB, L: 22 dB
Comfort features

With the cord, the earplugs are always conveniently at hand – in low-noise areas, the earplugs can be worn comfortably around the neck

uvex whisper – easy-to-clean reusable earplugs
Earplugs are often used in dirty work environments. This means that particles can easily stick to the surface of materials and cause minor injuries to the wearer's ears. The smooth and dirt-repellent surfaces of the uvex whisper, whisper+ and whisper supreme earplugs can easily be cleaned with soap and water. This increases wearer comfort and safety for the user.

General features

Easy-to-clean reusable earplugs with cord
Smooth, dirt-repellent surface can be easily cleaned using soap and water
Hygienic storage of earplugs in hygiene box
Colour: orange
Version with cord
Protection features

Meets standard EN 352-2 and the additional requirements "Signal hearing in railway track superstructure construction" (S) and "Warning signal hearing, general" (W)
22 decibels insulation – H: 23 dB, M: 19 dB, L: 17 dB
Comfort features

With the cord, the earplugs are always conveniently at hand – in low-noise areas, the earplugs can be worn comfortably around the neck

uvex xact-fit reusable – corded reusable earplugs with plastic storage box
These innovative earplugs feature a unique oval design that perfectly suits the anatomy of the ear canal. The angled pin – based on the shape of the ear canal – significantly reduces pressure in the ear. This combination ensures that the earplugs are comfortable to wear even during periods of extended use. The pre-formed pins, labelled left and right, make it easier to insert and remove the earplugs, even when wearing gloves. The uvex xact-fit reusable is available in two sizes, S and M/L and comes with a plastic box for hygienic storage.

General features

Easy-to-clean, reusable corded earplugs
Smooth, dirt-repellent surface can be easily cleaned using mild soap and water
Colour: grey
Available in two sizes (S and M/L)
Earplug box for hygienic storage when not in use
With adjustable cord
Protective features

Meets standard EN 352-2
26 decibel noise reduction – H: 27 dB, M: 23 dB, L: 22 dB
Adapts to the shape and size of the ear canal to minimise leakage, optimising fit and protection
Comfort features

Thumb indentations enable hygienic, quick and easy handling
The ergonomic shape reduces pressure in the ear, even when worn for extended periods
Thanks to the cord, the earplugs are always convenient to hand – in low-noise areas, the earplugs can be worn comfortably around the neck
Areas of application

Can be used with dirty hands or while wearing gloves
Ideal for variable environments
Versions available

2124017: Size S
2124018: Size M/L
Sustainability

Carbon footprint: 0.028 kg CO₂ eq
Carbon footprint of production: 0.003 kg CO₂ eq
Carbon footprint of materials: 0.009 kg CO₂ eq
Carbon footprint of transportation: 0.002 kg CO₂ eq
Carbon footprint of packaging: 0.014 kg CO₂ eq
CO₂ - time of calculation: 09/2023
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex xact-fit reusable – corded reusable earplugs in two sizes
These innovative earplugs feature a unique oval design that perfectly suits the anatomy of the ear canal. The angled pin – based on the shape of the ear canal – significantly reduces pressure in the ear. This combination ensures that the earplugs are comfortable to wear even during periods of extended use. The pre-formed pins, labelled left and right, make it easier to insert and remove the earplugs, even when wearing gloves. The uvex xact-fit reusable is available in two sizes, S and M/L.

General features

Easy-to-clean, reusable corded earplugs
Smooth, dirt-repellent surface can be easily cleaned using mild soap and water
Colour: grey
Available in two sizes (S and M/L)
Supplied in mini cardboard box
With adjustable cord
Protective features

Meets standard EN 352-2
26 decibel noise reduction – H: 27 dB, M: 23 dB, L: 22 dB
Adapts to the shape and size of the ear canal to minimise leakage, optimising fit and protection
Comfort features

Thumb indentations enable hygienic, quick and easy handling
The ergonomic shape reduces pressure in the ear, even when worn for extended periods
Thanks to the cord, the earplugs are always conveniently to hand – in low-noise areas, the earplugs can be worn comfortably around the neck
Areas of application

Can be handled with dirty hands or while wearing gloves.
Ideal for variable environments
Versions available

2124019: Size S
2124020: Size M/L
Sustainability

Carbon footprint: 0.018 kg CO₂ eq
Carbon footprint of production: 0.003 kg CO₂ eq
Carbon footprint of materials: 0.009 kg CO₂ eq
Carbon footprint of transportation: 0.002 kg CO₂ eq
Carbon footprint of packaging: 0.004 kg CO₂ eq
CO₂ - time of calculation: 09/2023
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex xact-fit refill box for "one 2 click" dispenser
These innovative earplugs adapt perfectly to the human ear. The uvex xact-fit planet earplugs feature a novel design based on the anatomy of the ear canal. This noticeably reduces pressure on the ear canal – even when worn for extended periods.

General features

Dispenser refill box, 400 pairs, loose
For use with uvex "one 2 click" dispenser 2112000
Colour: lime
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
26 decibels insulation – H: 28 dB, M: 23 dB, L: 19 dB
Adapts perfectly to the shape and size of the ear canal, thereby minimising leakages for perfect adjustment and optimal protection
Comfort features

Shape recreates the anatomy of the human ear – ensuring a comfortable fit at all times
Soft replacement earplugs guarantee optimal wearer comfort
Sustainability

Carbon footprint: 0.018 kg CO₂ eq
Carbon footprint of production: 0.0025 kg CO₂ eq
Carbon footprint of materials: 0.0097 kg CO₂ eq
Carbon footprint of transportation: 0.0017 kg CO₂ eq
Carbon footprint of packaging: 0.0037 kg CO₂ eq
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.4.0.2 ecoinvent database 3.8. Scope: cradle-to-customer. These CO2 values are valid at the time of calculation and may be subject to change.

uvex xact-fit planet – a new dimension in earplugs
These innovative earplugs adapt perfectly to the human ear. The uvex xact-fit planet earplugs feature a novel design based on the anatomy of the ear canal. This noticeably reduces pressure on the ear canal – even when worn for extended periods.

General features

Disposable earplugs with thumb indentations
Replacement earplugs can be stored in a dispenser
Colour: lime
Version with reusable pin
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
26 decibels insulation – H: 28 dB, M: 23 dB, L: 19 dB
Adapts perfectly to the shape and size of the ear canal, thereby minimising leakages for perfect adjustment and optimal protection
Comfort features

Thumb indentations for quick and easy handling
Shape recreates the anatomy of the human ear – ensuring a comfortable fit at all times
Soft replacement earplugs guarantee optimal wearer comfort
Related products

Soft replacement pods: 2124002
Dispenser refill box: 2124003
Sustainability

Carbon footprint: 0.017 kg CO₂ eq
Carbon footprint of production: 0.000 kg CO₂ eq
Carbon footprint of materials: 0.011 kg CO₂ eq
Carbon footprint of transportation: 0.002 kg CO₂ eq
Carbon footprint of packaging: 0.004 kg CO₂ eq
CO₂ - time of calculation: 06/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex com4-fit – small, high-performance earplugs
With its compact, ergonomically pre-shaped design, the uvex com4-fit is comfortable for wearers with narrower ear canals. The uvex com4-fit has a sealed surface, preventing foreign bodies from penetrating the plug. The soft foam provides a high level of comfort, even when worn for extended periods.

General features

Disposable earplugs with a compact, ergonomic design
Perfect for narrow and smaller ear canals
Colour: light orange
Version without cord
Protection features

Meets standard EN 352-2 and the additional requirements "Signal hearing in railway track superstructure construction" (S), "Signal hearing in road traffic" (V), "Warning signal hearing, general" (W) and "Signal hearing for locomotive drivers in railway operations" (E)
33 decibels insulation – H: 33 dB, M: 30 dB, L: 29 dB
Suitable for use in extremely loud environments
Comfort features

Patented x-grip technology reduces contact pressure in the ear canal and makes it significantly easier to remove the earplug
Increased wearing comfort, even when worn for long periods
Available variants

2112004: 200 pairs, uncorded, bagged in pairs
2112012: 100 pairs, corded, bagged in pairs
2112023: 300 pairs, dispenser refill box for use with uvex dispenser 2112000

uvex hi-com refill box for "one 2 click" dispenser
The innovative shape of the uvex hi-com earplugs reduces the level of sound that normally builds up in the inner ear when wearing hearing protection. Integrated cavities result in a larger surface area in the direction of the eardrum. The earplugs provide softer acoustics and absorb disruptive noises – they also allow excellent speech perception. This dispenser refill box is ideal for use with the uvex "one 2 click" dispenser.

General features

Dispenser refill box, 300 pairs, loose
Earplugs with low sound absorption and excellent speech perception
For use with uvex "one 2 click" dispenser 2112000
Colour: lime
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
26 decibels insulation – H: 30 dB, M: 23 dB, L: 18 dB
Comfort features

Reduces level of sound that can build up in the inner ear when wearing hearing protection
Available variants

2112100: 200 pairs, uncorded, bagged in pairs
2112101: 100 pairs, corded, bagged in pairs
2112118: 300 pairs, dispenser refill box for use with uvex dispenser 2112000

uvex hi-com – cuts out noise, lets in speech
The innovative shape of the uvex hi-com earplugs reduces the level of sound that normally builds up in the inner ear when wearing hearing protection. Integrated cavities result in a larger surface area in the direction of the eardrum. The earplugs provide softer acoustics and absorb disruptive noises – they also allow excellent speech perception.

General features

Earplugs with low sound absorption and excellent speech perception
Colour: lime
Version with cord
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
26 decibels insulation – H: 30 dB, M: 23 dB, L: 18 dB
Comfort features

Reduces level of sound that can build up in the inner ear when wearing hearing protection
Available variants

2112100: 200 pairs, uncorded, bagged in pairs
2112101: 100 pairs, corded, bagged in pairs
2112118: 300 pairs, dispenser refill box for use with uvex dispenser 2112000

uvex hi-com – cuts out noise, lets in speech
The innovative shape of the uvex hi-com earplugs reduces the level of sound that normally builds up in the inner ear when wearing hearing protection. Integrated cavities result in a larger surface area in the direction of the eardrum. The earplugs provide softer acoustics and absorb disruptive noises – they also allow excellent speech perception.

General features

Earplugs with low sound absorption and excellent speech perception
Colour: lime
Version without cord
Protection features

Meets standard EN 352-2 and the additional requirement "Warning signal hearing, general" (W)
26 decibels insulation – H: 30 dB, M: 23 dB, L: 18 dB
Comfort features

Reduces level of sound that can build up in the inner ear when wearing hearing protection
Available variants

2112100: 200 pairs, uncorded, bagged in pairs
2112101: 100 pairs, corded, bagged in pairs
2112118: 300 pairs, dispenser refill box for use with uvex dispenser 2112000

uvex pheos visor system – perfect ergonomics, maximum functionality
Every detail of the new pheos helmet system has been carefully thought through to deliver an advanced head protection solution. The magnetic locking system makes it even easier to attach the visor, while the ergonomic joint system makes it extremely comfortable to wear, even for long periods.

General features
Polycarbonate visors with uvex supravision excellence coating
Available with two alternative mountings: mechanical levers or automatic magnetic locks
Visor 9906002/9906003 are compatible with uvex pheos B-S-WR and uvex pheos alpine (Adapter 9790067 is required for combination with uvex pheos alpine)
Visor 9906005/9906006/9906007/9006008 can only be combined with uvex pheos E-S-WR
Visor 9906002 can be combined with earmuffs uvex pheos K2H (mechanical), visor 9906003 with uvex pheos K2H magnetic
Lenses can be changed
Comfort features
Quick assembly of visor and earmuffs (magnetic variant)
Joint system designed to improve the helmets ergonomics, evenly distributes the weight of all atchemnts across the body's centre of gravity
Anti-fog and anti-scratch visor

uvex pheos E-S-WR safety helmet – comfort and protection during electrical work
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. With a fully enclosed helmet shell and certification in accordance with EN 50365 (1,000 Volt AC), the uvex pheos E-WR is ideally suited to electrical work. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
Suitable for use by electricians as helmet shell is fully enclosed
With short brim
Available in: white, yellow, blue, orange, green, red, black
Comfort features
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash and is approved in accordance with EN 50365 (1000 V AC)

uvex pheos E-S-WR safety helmet – comfort and protection during electrical work
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. With a fully enclosed helmet shell and certification in accordance with EN 50365 (1,000 Volt AC), the uvex pheos E-WR is ideally suited to electrical work. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
Suitable for use by electricians as helmet shell is fully enclosed
With short brim
Available in: white, yellow, blue, orange, green, red, black
Comfort features
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash and is approved in accordance with EN 50365 (1000 V AC)

uvex pheos E-S-WR safety helmet – comfort and protection during electrical work
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. With a fully enclosed helmet shell and certification in accordance with EN 50365 (1,000 Volt AC), the uvex pheos E-WR is ideally suited to electrical work. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
Suitable for use by electricians as helmet shell is fully enclosed
With short brim
Available in: white, yellow, blue, orange, green, red, black
Comfort features
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash and is approved in accordance with EN 50365 (1000 V AC)

uvex pheos E-S-WR safety helmet – comfort and protection during electrical work
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. With a fully enclosed helmet shell and certification in accordance with EN 50365 (1,000 Volt AC), the uvex pheos E-WR is ideally suited to electrical work. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
Suitable for use by electricians as helmet shell is fully enclosed
With short brim
Available in: white, yellow, blue, orange, green, red, black
Comfort features
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash and is approved in accordance with EN 50365 (1000 V AC)

uvex pheos E safety helmet – reliable protection during electrical work
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. With a fully enclosed helmet shell and certification in accordance with EN 50365 (1,000 Volt AC), the uvex pheos E is ideally suited to electrical work.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
Suitable for use by electricians as helmet shell is fully enclosed
With long brim
Available in: white, yellow
Comfort features
Conventional suspension harness for comfortable adjustable fit
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash and is approved in accordance with EN 50365 (1000 V AC)

uvex pheos B-S-WR safety helmet – comfortable head protection with unrestricted upward vision
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With short brim
Available in: white, yellow, red, blue, dark grey, black
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-S-WR safety helmet – comfortable head protection with unrestricted upward vision
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With short brim
Available in: white, yellow, red, blue, dark grey, black
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-S-WR safety helmet – comfortable head protection with unrestricted upward vision
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With short brim
Available in: white, yellow, red, blue, dark grey, black
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-S-WR safety helmet – comfortable head protection with unrestricted upward vision
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With short brim
Available in: white, yellow, red, blue, dark grey, black
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-S-WR safety helmet – comfortable head protection with unrestricted upward vision
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With short brim
Available in: white, yellow, red, blue, dark grey, black
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-S-WR safety helmet – comfortable head protection with unrestricted upward vision
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times. The shortened brim ensures unrestricted upward vision.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With short brim
Available in: white, yellow, red, blue, dark grey, black
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Shorter brim for a wider field of upward vision
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash
Sustainability

Carbon footprint: 2.134 kg CO₂ eq
Carbon footprint of production: 0.720 kg CO₂ eq
Carbon footprint of materials: 1.150 kg CO₂ eq
Carbon footprint of transportation: 0.094 kg CO₂ eq
Carbon footprint of packaging: 0.170 kg CO₂ eq
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.4.0.2 ecoinvent database 3.8. Scope: cradle-to-customer. These CO2 values are valid at the time of calculation and may be subject to change. More information can be found at uvex-safety.com/carbon-footprint

uvex pheos B-WR safety helmet – versatile, comfortable head protection
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With long brim
Available in: white, yellow, orange, red, green, blue
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-WR safety helmet – versatile, comfortable head protection
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With long brim
Available in: white, yellow, orange, red, green, blue
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-WR safety helmet – versatile, comfortable head protection
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With long brim
Available in: white, yellow, orange, red, green, blue
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B-WR safety helmet – versatile, comfortable head protection
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs. The suspension harness with wheel ratchet allows continuous width adjustment, for a perfect fit at all times.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With long brim
Available in: white, yellow, orange, red, green, blue
Comfort features
Three variable air vents for maximum ventilation
Suspension harness with wheel ratchet for variable width adjustment
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash

uvex pheos B safety helmet – versatile, modern head protection
The lightweight uvex pheos safety helmets feature a sporty design and offer maximum wearer comfort – for example thanks to the climazone ventilation and the extremely flexible 3D suspension harness. The sturdy, rigid helmet shell also easily withstands pressure from the side, and fulfills all safety-related requirements for construction or industrial work. Its functional accessory system makes the uvex pheos industrial safety helmet especially versatile. Whether visor, safety spectacles, ear defenders or head torch: The work helmets can quickly and easily be adapted to the user's individual needs.

General features
Safety helmet with slot on the front for helmet lights
Side Euroslot adapters (30 mm) for attaching earmuffs and the uvex pheos visor system
With long brim
Available in: white, yellow, orange, red, blue, black
Comfort features
Three variable air vents for maximum ventilation
Conventional suspension harness for comfortable adjustable fit
Six-point textile band attachment ensures optimal fit and comfort
Protection features
Meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash