Size 125mm (5in).Side: 9/32in. Type: slim taper saw file.

Size 100mm (4in).Side: 1/4in. Type: slim taper saw file.

This Bahco Taper Saw File has a triangular shape, with edges tapering towards the point. The surfaces and edges are single cut. Ideal for sharpening saws with universal teething and teeth at a 60 angle. Available only in second cut. Size 150mm (6in)Width: 12.5mmTeeth per cm: 17

This Bahco Handled Three-Square File has the following specification: Size: 200mm (8in)Cut: Second CutFile Width: 15.5mmTeeth per cm: 15

This Bahco ERGO™ Handled Engineering Square Filehas the following specification: Size: 250mm (10in)Cut: Smooth CutFile Width: 8mmTeeth per cm: 15

This Bahco ERGO™Handled Engineering File has the following specification: Size: 150mm (6in)Cut: Smooth CutFile Width: 6mmTeeth per cm: 17

The Bahco 4-in-2 ERGO™ Homeowner's File Set is suitable for both rough and fine filing of a variety of materials. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. 4 different surfaces in 2 files; 1 x 200mm (8in) File with 2 sides:Rasp bastard cut: Rough filing of wood, plywood, soft plastics, etc.Double second cut: Fine filing of metals, iron and plastics, etc. 1 x 200mm (8in) File with 2 sides:Double bastard cut: Rough sharpening of edges on spades, hoes, mower blades, axes, etc.Single second cut: Fine sharpening of edges on above implements and on knives and scissors

Bahco 2-in-1 ERGO™ Homeowner's Metal File with a two-component handle for maximum comfort and excellent grip. Developed according to the scientific ERGO™ process. With 2 different filing surfaces: Double cut: rough sharpening of edges on spades, hoes, mower blades, axes, etc.Single cut: fine sharpening of edges on above implements and on knives and scissors Specification: Shape: flat, parallel, with 2 flat, uncut edgesLength: 200mm (8in)

Bahco 2-in-1 ERGO™ Homeowner's Wood File with a two-component handle for maximum comfort and excellent grip. Developed according to the scientific ERGO™ process. With 2 different filing surfaces: Rasp cut: rough filing of wood, plywood, soft plastics, etc.Double cut: fine filing of metals, iron and plastics, etc. Specification: Shape: flat, parallel, with 2 flat, uncut edgesLength: 200mm (8in)

Millsaw bastard cutSize 200mm (8in)Tanged

Millsaw bastard cutSize 250mm (10in)Tanged

Millsaw bastard cutSize 200mm (8in)Tanged

Millsaw bastard cutSize 250mm (10in)Tanged

This Bahco ERGO™ Handled Tapered Edge Flat Filehas the following specification: Size: 200mm (8in)Cut: SecondFile Width: 20mmFile Thickness: 5mmTeeth per cm: 15

Bahco ERGO™ Handled Engineering Flat File with a tapered shape for easier access into angles and corners. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. Suitable for general work on iron and steel. The surfaces have a double cut and the edge is single cut. Specification: Length: 200mmCut: BastardWidth: 20mmThickness: 5mmTeeth per cm: 10

This Bahco ERGO™ Handled Oberg Cut File has the following specification: Length: 250mm (10in)File Width: 25mmFile Thickness: 6mmTeeth per cm: 9

This Bahco ERGO™ Handled Oberg Cut File has the following specification: Length: 200mm (8in)File Width: 20mmFile Thickness: 5mmTeeth per cm: 10

This Bahco ERGO™ Handled Flat File has the following specification: Size: 150mm (6in)Cut: SecondFile Width: 16mmFile Thickness: 4mmTeeth per cm: 17

This Bahco ERGO™ Handled Flat File has the following specification: Size: 150mm (6in)Cut: BastardFile Width: 16mmFile Thickness: 4mmTeeth per cm: 12

This Bahco ERGO™ Handled Flat File has the following specification: Size: 200mm (8in)Cut: SecondFile Width: 20mmFile Thickness: 5mmTeeth per cm: 15

This Bahco ERGO™ Handled Flat File has the following specification: Size: 200mm (8in)Cut: BastardFile Width: 20mmFile Thickness: 5mmTeeth per cm: 10

This Bahco ERGO™ Handled Flat File has the following specification: Size: 250mm (10in)Cut: BastardFile Width: 25mmFile Thickness: 5.5mmTeeth per cm: 9

This 6-piece BlueSpot Tools Mini File Set contains: 1 x flat file, 1 x half-round file, 1 x triangular file, 1 x square file, 1 x round file and 1 x slim taper file. Supplied with a pouch for storage. The files are fitted with comfortable, plastic handles and have the following specification: Overall Length:150mm (6in). Blade Length: 100mm (4in).

Bahco 5 Piece ERGO™ Engineering File Set. All files are fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process. Supplied in a cardboard outer display packaging containing plastic roll-up wallet.Contains: 1 x 1-210-08-1-2 Half-Round Bastard Cut File 200mm (8in)1 x 1-230-08-1-2 Round Bastard Cut File 200mm (8in)1 x 1-100-08-1-2 Flat Bastard Cut File 200mm (8in)1 x 1-100-08-2-2 Flat Second Cut File 200mm (8in)1 x 1-160-08-1-2 Square Bastard File 200mm (8in)

BlueSpot Tools 5 Piece Handled File Set contains a selection of Engineer's Files manufactured from carbon steel for durability. Soft grip handles for increased comfort. Set contains: 1 x Round File 200mm (8in)1 x Half-Round File 200mm (8in)1 x Triangular File 200mm (8in)1 x Flat File 200mm (8in)1 x Square File 200mm (8in)

The Vaughan 3 Piece Nail Punch Set is used for countersinking and finishing nails. They have a high-carbon steel construction with a black oxide finish to ensure long-lasting performance. The hand grips provide added user comfort. Sizes: 0.8, 1.6 and 2.4mm

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic.Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications: Set of two bits, Size No 2 and No 3.Screw Sizes: No 6 to No 14.Bolt Sizes: M4 to M8.

1 x Trend EASYSCRIBE Scribing Tool with 3 x Graphite Leads.

1 x Pack of 10 Trend EASYSCRIBE Spare Graphites

This Teng 1/2 inch drive Stud Extractor is used for inserting and extracting stud bolts. The extractor has a range from 5.5 to 19mm and features one eccentric journaled, knurled wheel which grips against an internal fluting. Specifications: Drive: ½ in.Range: 5.5 to 19mm.

Range 8 - 13 mm (5/16 - 1/2 Inch) Handle 60 mm (2 3/8 Inch)Range 13 - 19 mm (1/2 - 3/4 Inch) Handle 60 mm (2 3/8 Inch)Range 19 - 32 mm (3/4 - 1 1/4 Inch) Handle 60 mm (2 3/8 Inch)Range 32 - 54 mm (1 1/4 - 2 1/8 Inch) Handle 60 mm (2 3/8 Inch)Range 54 - 89 mm (2 1/8 - 3 1/2 Inch) Handle 60 mm (2 3/8 Inch)Range 89 - 150 mm (3 1/2 - 6 Inch) Handle 82 mm (3 1/4 Inch)

Range 8 - 13 mm (5/16 - 1/2 Inch) Handle 60 mm (2 3/8 Inch)Range 13 - 19 mm (1/2 - 3/4 Inch) Handle 60 mm (2 3/8 Inch)Range 19 - 32 mm (3/4 - 1 1/4 Inch) Handle 60 mm (2 3/8 Inch)Range 32 - 54 mm (1 1/4 - 2 1/8 Inch) Handle 60 mm (2 3/8 Inch)

1 x Starrett S565PC Pin Punch Set 8 Piece Sizes: 1.5mm (1/16in), 2.5mm (3/32in), 3mm (1/8in), 4mm (5/32in), 5mm (3/16in), 5.5mm (7/32in), 6mm (1/4in) and 8mm (5/16in).

1 x Starrett S248PC Long Pin Punch Set 5 Piece Sizes: 3mm (1/8in), 5mm (3/16in), 6mm (1/4in), 8mm (5/16in) and 9.5mm (3/8in).

Set of all sizes: 1.5mm (1/16 in), 2mm (5/64 in), 2.5mm (3/32 in), 3mm (1/8 in) and 4mm (5/32 in).

Description: Double end Body diameter: 10 mm Contact diameter: 6 mm and pointed contact

Description: Single end Body diameter: 10mm Contact diameter: 6mm

Description: Double endBody diameter: 0.500 Inch Contact diameter: 0.200 Inch and pointed contact

Description: Single end Body diameter: 0.375 Inch Contact diameter: 0.200 Inch

Inch Reading Gauges with Tapered leaves 1/2-1.4 x 1 1/32 in No. of leaves: 26 Range: 0.0015 - 0.025 in (0.0015, 0.002, 0.0025, 0.003 to 0.025 by 0.001 in steps).

Millimetre Reading Gauges with Straight leaves 12.7 x 77 mm No. of leaves: 20 Range 0.05 - 1 mm (by 0.05mm steps)

Thickness: 0.06mm

Thickness: 0.50mm

Thickness: 0.05mm

Thickness: 0.03mm

Thickness: 0.20mm

Thickness: 0.15mm

Thickness: 0.10mm

Inch Gauge 12 in long Thickness: 0.005 in

Inch Gauge 12 in long Thickness: 0.004 in

Inch Gauge 12 in long Thickness: 0.030 in

Inch Gauge 12 in long Thickness: 0.020 in

Inch Gauge 12 in long Thickness: 0.002 in

Inch Gauge 12 in long Thickness: 0.012 in

Inch Gauge 12 in long Thickness: 0.0015 in

Inch Gauge 12 in long Thickness: 0.010 in

Inch Gauge 12 in long Thickness: 0.001 in

Inch Reading Gauges with Straight leaves 1/2 x 3 1/32 in No. of leaves: 26 Range: 0.0015 - 0.025 in ( 0.0015, 0.002, 0.0025, and 0.003 to 0.025 by 0.001 in steps)

Size 6mm (1/4 in)

Size 5mm (3/16 in)

Size 4mm (5/32 in)

Size 2.5mm (3/32 in)

Size 1.5 mm (1/16 in)

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch. Whitworth standard - 55 threads No. of leaves: 30 TPI range: 3 1/2 - 60 With positive stop.

Millimetre Reading Gauges with Straight leaves - Sized 12.7 x 114mmNo. of leaves: 13Range 0.04 - 5mm (0.04- 0.08 by 0.01mm steps 0.10, 0.15, 0.20,0.30, 1.0, 2.0, 3.0 and 5.0mm).

Inch Reading Gauges with Straight leaves 1/2 x 4 1/2 in No. of leaves: 13 Range: 0.0015 - 0.200 Inch (0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010 to 0.040 by 0.01 in steps , 0.075, 0.100, 0.200 in).

This micrometer has a 63.5mm (2.1/2in) base and 3.2mm (1/8in) diameter measuring rod. Base and rod are hardened, ground and lapped. Furnished with ratchet stop, lock nut and case. Size: 0-75mm.Rods: 3.Graduation: 0.01mm.

The Starrett 436.1XRL-2 Outside Micrometer has the following specification: Size: 1-2in.Graduation: 0.001in.

The Starrett 436.1MXRL-75 Outside Micrometer has the following specification: Size: 50-75mm.Graduation: 0.01mm.

The Starrett 436.1MXRL-50 Outside Micrometer has the following specification: Size: 25-50mm.Graduation: 0.01mm.

The Starrett 436.1MXRL-100 Outside Micrometer has the following specification: Size: 75-100mm.Graduation: 0.01mm.

Precision ground straight edge with a bevel on one side, which is excellent for drawing or scribing straight lines and checking surfaces for straightness. The thickness and design permit it to retain shape and accuracy. Specification: Length: 600mm (24 in)Width x thickness: 36 x 4.4mm (1 13/32 x 11/64 in).

Size 9.5mm (3/8 in)

Size 8mm (5/16 in)

Size 6mm (1/4 in)

Size 5mm (3/16 in)

Size 3mm (1/8 in)

Rugged steel centre punch has a mechanism which automatically strikes a blow when downward pressure is applied. Force of blow is regulated by the adjustable knurled cap. No hammer is required. Punch length: 125mm (5 in).Punch diameter: 14mm (9/16 in). Spare points also available STR18APOINT

Millimetre Reading Gauges with Straight leaves 12.7 x 77mmNo. of leaves: 13 Range: 0.03 - 0.5mm ( 0.03- 0.10 by 0.01 mm steps, 0.15, 0.20 to 0.50 by 0.1 mm steps)

Capacity: 70mm (2 3/4 in). Throat Depth: 45mm (1 25/32 in).

Capacity: 44mm (1 3/4 in). Throat Depth: 25mm (1 in).

Lightweight and ideal for measuring inside diameters, the rods are solid, insulated and assembled on one side of the micrometer head. Anvils on rods are adjustable for length. Rod and anvils are hardened and ground. Furnished in an attractive protective case. Size: 50-300mmGauge: 12mmScrew adjustment: 13mmGraduation: 0.01mm

Size 4 x 100mm (5/32 x 4 in)

Size 3 x 100mm (1/8 x 4 in)

Size 2.5 x 100mm(3/32 x 4 in)

Size 1.5 x 75mm (1/16 x 3 in)

Size 2 x 100mm (5/64 x 4 in)

The Stanley Punch Chisel Set contains a selection of high quality, chrome vanadium steel chisels for cutting, shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium and for cutting bolts, nuts and rivets. Punches are also made from chrome vanadium steel to precise specifications and are used for marking centre lines, hole locations and pilot drill starting points. Contains the following: 3 x Cold Chisels: 10, 12, 16mm6 x Pin Punches: 1.5, 3, 4, 5, 6, 8mm3 x Centre Punches: 2, 6, 8mm

A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).

The Stanley FatMax Interchangeable Nail Set has an interchangeable system that accepts conventional bits. Fitted with a bi-material, cushion grip for increased comfort and reduced slipping. Specification Nail Sizes: 1/32, 2/32in.

This set of 3 punches contains the following tip sizes:1/32in (0.8mm) Yellow Sleeve 1/16in (1.6mm) Grey Sleeve3/32in (2.4mm) Red SleeveOverall Length: 125 mm / 5in

Tip Size: 2.4mmLength: 5inColour: Red Sleeve

Tip Size: 1/16inLength: 5inColour: Grey Sleeve

Tip Size: 1/32inLength: 5inColour. Yellow Sleeve

Hardened and tempered square head centre punch with knurled shank and black coated finish. The knurled body provides a secure grip during use. Length: 3.2 x 100mm (1/8 x 4in).

Roughneck 3 Piece Nail Punch Set. Each punch is fitted with a colour coded grip for easy identification. Contains: Yellow: 0.8mm (1/32in), Blue: 1.6mm (1/16in), Red: 2.4mm (3/32in)

RIDGID 227S Inner-Outer Reamer Capacity: 12-54mm (1/2 - 2in).Weight: 0.56kg.

RIDGID 223S EN Inner-Outer Reamer Capacity: 6 - 40mm (1/4 - 1.1/4in).Weight: 0.34kg.

Size.M10 x 1.50 Pitch.Intermediate

Size.M8 x 1.25 Pitch.Intermediate