Tools

Multiclamp 3-in-1 Clamp with Carry Case

The Carver Multiclamp is a combination of three of the most popular Clamps in the Carver range. It includes the 150mm, 250mm and 300mm Long Reach Clamps.The Carver Multiclamp is a multi-functional unit with inter-changeable heads all contained in a dedicated carry case for easy transportation and storage. Standard/Long Reach: 15-300mm.Clamping Force: Standard: 8500 daN, Long: 425 daN.Supplied with: 1 x Carver C301242 Multiclamp 3 in 1 Clamp With Carry Case.

£ 370.55

SLV150M Variable Screw Clamp Capacity 1500mm

The Bessey Variable Screw Clamps offer flexibility with large clamping widths. They have tempered spindles which are particularly sturdy and wear-resistant. This considerably increases durability. The end fastenings on both sides can be loosened without tools, enabling rapid changeover of the sliding arm for spreading tasks. It is also possible to replace the sliding arms or to add additional sliding arms easily. The U-shaped sliding arms are made from forged tempered steel which guarantees the highest level of safety and can withstand extremely large loads. They have heat-resistant pressure plates which can be tilted up to 35 for angled or sloping surfaces. Clamping force: Up to 6,500N.The SLV150M Variable Screw Clamp has the following specifications: Opening: 1500mm.Throat depth: 120mm.Rail: 28 x 11mm.Weight: 5.25kg.

£ 159.80

PS 55 Seaming Tool

The Bessey PS55 is an ideal clamp for clamping smooth surfaces such as ceramic, granite, Corian plastic, sheet metal and glass. There is a lever for compensating differences in height. Opening: 10-55mm. Width: 130mm.Length: 240-295mm.Clamping Force: up to 260N.Weight: 1.55Kg.

£ 382.47

BAN700 Band Clamp

The Band Clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm, all-round clamping, which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60 to 180 . Clamping Range Up to 7mBand Width Depth 25mm x 1mmAngle 60 / 80 DegreesWeight: 0.53Kg

£ 63.66

One-Handed Ratchet Clamp 150mm (6in)

The BlueSpot Tools One-Handed Ratchet Clamp features a ball socket joint which is attached to a plastic, non marking pad for clamping uneven or angled surfaces and workpieces. To release just push the lever on the back of the handle and pull back the hooked sliding bar.

£ 13.31

Heavy-Duty Corner Clamp 57mm

The Stanley Heavy-Duty Corner Clamp has an articulating design that allows for pieces of equal or varying thickness to be joined at right angles. Its reversible head design means it can be used as a parallel clamp. The heavy-duty cast zinc construction provides increased durability. Whilst comfort and maximum torque is achieved via the bi-material tri-lobular handle. Mounting holes allow clamp to be securely attached to work surfaces. Specification Throat Depth: 30mm.Clamping Capacity: 57mm.Weight: 1010g.

£ 14.66

Laminate Cutter

The Vitrex 80 0100 Laminate Cutter is guaranteed to provide quick and easy cuts for all laminate flooring up to 200mm (8in) wide and 12mm (15/32in) deep. The simple cutting process helps to speed up the installation. Easy to use, the blade speeds accurately through cuts. The V-support ensures the laminate panels are held level and secure during the cut. The long life blade requires no maintenance. Cuts at 90 and produces a clean and professional finish.

£ 63.64

B215H Hook Bar 380mm (15in)

The Vaughan B215H This hook bar has a reverse hook to provide excellent leverage and travel capacity. Forged from spring tempered steel, making it ideal for heavy-duty use. With 3 bevelled nail slots and polished, sharp blades for easy insertion. Made in the USA.

£ 20.19

Door Lifter A

This Trend foot operated Tredlifta Lifter A is used to support the door while fitting into the door frame, it is foot operated freeing up the users hands. It slides under the door, stays flat and stable until ready to activate the lift with the users foot.It will lift 38mm high and hold a maximum weight of 108kg.Made from plastic and non-marring, they have a cam design and internal weight to keep level for ease of use. This lifter is ideal for pinned hinges, they can be carried in a tool belt, there is no need to use a chisel or a bolster. Specifications: Weight: 303g.Lifts to height: 38mm.Maximum door weight: 108kg.Size: 254mm x 44mm x 75mm.

£ 35.01

FatMax® Masons Chisel With Guard 45mm (1.3/4in)

Designed to cut brickwork and concrete, this masons chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material hand guard for increased comfort and protection from over strike. Size: 215 x 45mm (8 1/2 x 1 3/4 in).

£ 16.07

FatMax® Floor Chisel With Guard 75mm (3in)

Used by carpenters, electricians and plumbers for lifting floorboards or channelling recesses in solid floors. The chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety.Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 280 x 75mm (11 x 3 in).

£ 21.21

The Howcroft Team

Fully Stocked MRO Inventory

If you need it, we stock it...

Howcroft Group - E-Brochure

Custom Branded

Product Solutions

Fully Stocked Chain Inventory

CSUK - E-Brochure

Tools

Don't see what you need?