Features:
• Particularly useful for lubricating chains, gears and moving metal parts as well as hinges, locks and pivots
• Resistant to friction and weather
• Highly resistant to high temperatures (up to 210 °C)
• Highly adhesive. Does not drip


Direction for use:
Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 15 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Unlocking lubricant, super-penetrating
Unlocking, deoxidizing, highly penetrating, for quick rust and oxidation removal from nuts, bolts, screws and gears.
Waterproof, for water and humidity removal from treated parts.
Highly resistant to cold and heat (-40 °C ÷ +150 °C).


DIRECTION FOR USE: Apply product and wait a few minutes.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

7-in-1 multipurpose unlocking lubricant
Adjustable Straw.
7 in 1.
1. Unlocking: dissolves rust from nuts, bolts and gears in general.
2. Lubricating: suitable for all mechanical parts subject to stress.
3. Detergent, degreasing: removes grease and oil from metal surfaces.
4. Rust protective: forms a film protecting against corrosion from weather.
5. Deoxidizing, for electrical contacts: reactivates contacts and prevents short circuits.
6. Waterproof: removes water and humidity from all surfaces.
7. Antifreezing: highly resistant to low temperatures (up to -40 °C).
Fitted with a special valve allowing supply when spray can is upside down.
Silicone-free.
ADJUSTABLE STRAW allows - through a special modular straw - application on parts which would be difficult to reach with a standard dispenser.


Directions for use:
Apply product and wait a few minutes.
To unlock: use suitable tools.
To degrease: clean with a cloth.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

095260010 9526P

095260005 9526F

Features:
• Overall height: 460 mm
• 3 drawers with ball bearing slides
• Front tote-tray
• Rear tote-tray with partitions
• 4 pivoting castors
• Weight: 10.6 kg
 10,6 kg

New Item
Anti-loosening locking screw,
made of stainless steel
Kevlar®
Fibre optics
• Made of steel specially treated to work on cut-proof materials, including aramidic fibres, e.g. Kevlar®
• Also suitable for fibre optics

• Die-cast aluminium body plated with black chemical nickel
• Nylon cup with drip-catching device, 3/8M BSP thread
• Body thread: 1/4" BSP cylindrical gas thread
• Pressure and airflow regulator
• Jet regulator from round to fan spray pattern
• Paint quantity regulator
• Supplied with service spanner for maintenance operations

100% Italian made: unparalleled reliability and sturdiness
for professional uses
Particularly recommended for surface finishing jobs on several materials (metal, plastic, glass, ceramic, wood etc.). The cabin is made from properly reinforced sheet steel which results in unparalleled sturdiness and firmness.
The cabin is equipped with the following:
- loading door with magnet closure
- perforated sheet metal top
- standard connection for vacuum cleaners, ø 36 mm
- protective polycarbonate viewing window, 6 mm
- LED lamp
- pneumatic circuit (compressed air inlet)
- sanding gun with trigger operation


TECHNICAL DATA
Useful dimensions of cabin: 600x520x320 mm
Overall dimensions: 660x530x500 mm
Weight: 38 kg
Worktop: perforated sheet metal
Lighting: LED
Air consumption: 340 l/min at 7 atm
Power supply: 220 V - 50 Hz

Cartridge capacity: 310ml Bag capacity: 310ml Not suitable for use with loose bonds

017720029 1772H 170 18 213,4

for deforming plastics and unlocking metal parts
35 g tank

• three interchangeable nozzles: 550 °C; 1000 °C; 1300 °C
• supplied with a stand in hard case

4 sensors with TRUE COLOR filter.
Solar cell power supply and lithium batteries for outstanding LCD filter life.

Features:
• Viewing area: 98x80 mm
• Darkening shade range: 5÷8.5/ 9-13, internally adjustable
• UV/IR protection: DIN16
• Light to dark time: 1/25000 s
• Dark to light time: 0.1-2.0s
• Adjustable darkening sensitivity and delay
• Auto on/off
• Grinding feature
• Low battery indicator
• Ergonomic design, lightweight, well-balanced
• With adjustable ring nut

Features:
● Viewing area: 92x43 mm
● Darkening shade: DIN 9-13, externally adjustable
● UV/IR protection
● Light to dark time: 1/1000 s
● Dark to light time: 0.1-1.0 s
● Adjustable darkening delay
● Auto on/off
● Grinding feature
● Optimized shape to make it easier to breathe with pulled-down screen

DEWALT DCS565N-XJ 18V XR 165mm Circular Saw, Bare Unit

Variable adjustment of the bevel angle to 50 degrees
Model number; dEWDCS565N
Dust blower and LED work light ensure cutline visibility
Include brushless motor for extended run-time, reliability and durability
Durable tool design including a cast aluminum base for accurate cuts

Product Overview
Ready to take on a variety of your cutting applications. The DCS565 18V XR 165mm Circular Saw combines performance and versatility and features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provides a max depth of cut of 55mm at 90° along with a max bevel of 50°.



Additional Features
DEWALT Brushless Motor for extended run-time, reliability & durability
Extremely durable tool design, including a cast aluminum base for repetitive, accurate cuts
Variable adjustment of the bevel angle to 50 degrees
Ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut
Optimum balance for safe, fatigue-free operation
Lock off switch and electronic motor brake for additional control and work safety
Additional handle for safe two-handed work
Direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose
Convenient storage on the jobsite with the built-in rafter hook
Dust blower clears dust and debris from cut line

DEWALT DCS355N-XJ Oscillating Multi-Tool 18V Li-Ion Cordless Brushless Battery Powered

Compact 300W motor delivers 0-22,000 oscillations per minute, providing faster completion of the most demanding tasks
Variable speed control and dual grip position allows for a simple soft start function and better application control
Quick-fit depth stop for ultimate control over application
Unique quick change accessory system allows for blades and attachments to be easily changed without the use of tools
Part of the DEWALT's biggest and fastest growing system - XR, compatible with all 18V XR batteries. DEWALT 18V XR Lithium-Ion Battery sold separately.

Product Overview
The DCS355 18V XR Oscillating Multi-Tool has a powerful brushless motor providing up to 57% more run time over a similar brushed tool. The Quick-Change accessory system allows you to change blades quickly and easily, and with the universal accessory adaptor, it's compatible with most oscillating tool accessories. The Variable Speed Trigger provides ultimate speed and application control, the DEWALT Oscillating Tool Guide System allows you to customize the depth or height for accurate repeatability, and the bright LED light illuminates dark work spaces. Bare unit, batteries and charger sold separately.



Additional Features
Bright LED light illuminates dark work surfaces for accurate cutting
DUAL-GRIP Variable Speed Trigger provides the ultimate speed and application control
QUICK-CHANGE Accessory System allows blades and attachments to be changed quickly without the use of tools
Universal Accessory Adaptor for use with most oscillating tool accessory brands
29 pc Accessory Set to support a range of cutting and sanding applications
DEWALT Brushless Motor delivers up to 57% more run time over brushed motors

• Sheet metal frames and plastic tops
• 3 detachable modules:
1 upper tool box, 220 mm high 1 central module, 165 mm
high,with 2 drawers, 60 mm high 1 lower module, 330 mm
high, with up-and-over door, 280 mm high, with castors
• Castors ø 128 mm
• Telescopic handle, can be adjusted in 4 positions
• Module release system with access to all tool compartments
• Upper tool box with removable interior
object compartment and 2 tote-trays built into cover

BW 42 Combination wrenches 8-10-11-12-13-14-15-17-19 mm 9
BW 1150BM 180 Heavy-duty combination pliers  180 mm 1
BW 1082BM 160 Diagonal cutting nippers  160 mm 1
BW 1770RL 9-mm snap-off spare blades, 10 pieces,
for utility knives BW 1770, BW 1770A and BW 1770BM 10x 10

Features:
• Maximum capacity: 10 t
• Manual 2-speed pump
• Moving piston
• Automatic piston return
• Set of V-shaped prisms included
• Chrome-plated stand

Reversible impact wrench, made from composite material
Features:
• Double hammer impulse device
• Lightweight and well-balanced for enhanced ease of use
• Reversible lever
• Three power adjustable screwing positions
• Exhaust through handle
• Vibration-damping handle
Free speed 5,000 rpm
Max. torque 2,100 Nm
Bolt capacity Cl 8.8 M3046 mm
Bolt capacity Cl 12.9 M2741 mm
Air inlet 3/8" GAS
Operating pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 221 l/min
Weight 3.7 kg

Feeler gauges for car body repair shops, pair, 10-bladed, with suction cup
Suitable for:
• fitting rear windows
• maintaining position during installation


 50 g

Product Name
Art.
Quantity per Wishlist
Product Name
Art.
Quantity per Wishlist
012031001 1203E/D5
Set of 5 Evox screwdrivers items 1201E, 1202E
1
012031003 1203E/D5PZ
Set of 5 Evox screwdrivers items 1201E, 1209E/PZ
1
012031006 1203E/D6
Set of 6 Evox screwdrivers items 1202E, 1204E
1
012031007 1203E/D7
Set of 7 Evox screwdrivers items 1201E, 1202E
1
012031008 1203E/D8
Set of 8 Evox screwdrivers items 1201E, 1202E
1
012031018 1203E/D8P
Set of 8 Evox screwdrivers
1
012031010 1203E/D10
Set of 10 Evox screwdrivers items 1201E, 1202E
1
012031019 1203E/D10N
Set of 10 Evox screwdrivers items 1201E, 1202E

Plastic barrier chain

Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

C25
Tank trolley with shelf
Main features:
• Foldaway lid.
• 1 sliding drawer.
• Tool tray protected by foamed rubber mats.
• Shelves protected by oil and fuel proof mats.
• Four castors 100 mm in ø:
2 fixed and 2 swivelling (one with brake).
• Safety lock.
• One more shelf M4 can be added on the opposite side.
• Empty thermoformed tray for 1/2" sockets and accessories (024990104).
• Paper roll holder item 2499PC
can also be included


 31,5 kg

1752
Plastic pressure cans, rigid spouts
For use with oil with density ranging from ISO22 to ISO68

123E1/4
Bit holder adaptor, 1/4", for 10 mm ratcheting wrenches
• Used in combination with 10-mm ratcheting wrench, it allows quick use of bit.

1473P
Clamp pliers for OETIKER® low-profile collars

T145
Hard thermoformed tray with tool assortment

 640 g

 1032 circlip pliers straight, internal  180 mm
 1034 circlip pliers bent, internal  170 mm
 1036 circlip pliers straight, external  175 mm
 1038 circlip pliers bent, external  175 mm

Product Name Art.
024240145 T145
hard thermoformed tray with tool assortment
1
024000448 TV145
thermoformed tray T145, empty
1

Product Name Art.
014300105 1430/S5
set of 5 tapered extractors for broken screws and studs, made from hardened steel (item 1430/..), in case
1430/1-1430/2-1430/3
1430/4-1430/5

Double ended hexagon / bi-hex socket wrenches, chrome-plated
• Can be used with sliding handle in through hole.
• Hole on short side allows access to nut, e.g. with projecting threads.

Product Name Art.
000960946 96T/S5P
Set of 5 offset hexagon key wrenches with handles
2,5-3-4-5-6

Lever operated grease guns
Can be used with cartridges 1750CG or loose grease


Product Name Art. 1750CG
cc cc ​L
mm
017500500 1750 500 400 500 380

Magnetic bit holder, insulated, with bimaterial handle
Product Name Art. L
mm L1
mm D
mm 
g
008500910 850MQ 233 125 12.5 85

DC-powered inverter welding machine for MMA welding
The merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A., has translated into the DC inverter welding machine, BETA 1860BH, ideal for MMA welding with rutilic, basic and stainless steel electrodes.
Compact and lightweight, complete with arc force, hot start, anti-sticking and thermostatic protection features, it is the perfect choice for semi-professional maintenance jobs.

Supplied with 16 mm2 cables and hammer brush.
Power Generator Friendly.


Features

• Adjustment current:10÷120A
• Power supply: 1x230V
• Use factor (40 °C) :
25% - 120 A
50% - 80 A
100% - 60 A
• Protection: IP22S
• Usable electrodes: Ø 1.6 - 3.2mm rutilic, basic, stainless steel, cast iron etc.
• Supplied with 16mm² cables

Inverter welding machine for MMA welding
The merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A., has translated into the DC inverter welding machine, BETA 1860BH, ideal for MMA welding with rutilic, basic and stainless steel electrodes.
Compact and lightweight, complete with arc force, hot start, anti-sticking and thermostatic protection features, it is the perfect choice for semi-professional maintenance jobs.

Supplied with 16 mm2 cables and hammer brush.
Power Generator Friendly.


Features

• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
25% - 160 A
60% - 100 A
100% - 80 A
• Protection: IP22S
• Usable electrodes: Ø 1.6 - 4mm rutilic, basic, stainless steel, cast iron etc.
• Supplied with 16mm² cables

Measuring tapes with fixed magnets
Features:
• Shock-resistant ABS casings
• Steel tapes
• Precision class: II

Break-back torque wrenches

Product Name Art. ​Nm ​Kgfm ​lbf.ft ​D
mm ​A
mm ​L
mm ​
kg ​
006770607 677/C600 120÷600 12÷60 100÷450 69 55 1059 6,0 10

006770612 677/C800 200÷800 20÷80 150÷600 69 55 1319 6,7 10

006770616 677/C1000 300÷1000 30÷100 200÷750 69 55 1554 7,4 20

006770621 677/C1500 700÷1500 70÷150 500÷1000 69 55 1869 9,6 25

Evox-E electric screwdriver
Technical data:
• 3.7V 2300mAh lithium battery
• Maximum torque in electric mode: 1.2 Nm
• Over 1,000 screw fastenings at 1.2 Nm per charging cycle
• Speed: 250 rpm
• Outstanding static resistance (up to 12 Nm, manual tightening)
• Outstanding mechanical resistance
• 1/4" magnetic bit holder
• Compatible with all standardized bits
• Rechargeable via USB-C cable (included)
• USB-C port protected with screw cap
• Front ring LEDs for improved visibility of working area
• When charging, steady LEDs indicate that charging is complete
• Ergonomic nylon handle inspired by Evox screwdriver
• Built-in and sealed operation buttons
• Convenient belt pouch with bit pockets (6 50mm-long mixed bits included)

Self-locking wrench with automatic take-up device for hexagons, 8 to 32 mm
Effective on worn screws
Quick, multipurpose
Ideal for hexagon, Spline, square and Torx® head screws, including damaged screws.

Tool pouch, empty, made from nylon, with belt
• Five large tool pockets
• One front scissors pocket
• Buckle with carabine hook for adhesive tape
• Adjustable belt (70 ÷ 120 cm)

Dimensions: 155x285x80 mm

Folding tool trolley for outdoor jobs
Can be transported on a vehicle.
Folding tool trolley. Its unique patented design guarantees an effortless transport.

Features:
• 2 drawers, 588x277 mm, with ball bearing slides, for two-way opening
• Large lower object compartment, 588x277x220 mm
• Sheet metal frame
• 2 fixed castors, Ø 160 mm, and 2 steering castors with brake, Ø 100 mm
• Thermoplastic worktop with 6 built-in tool trays
• Centralized lock
• Can accommodate drawer partitions and MC foam tool trays

 20 kg
 990x390x700 mm

Folding workbench, Light version
Even lighter; only 18.5 kg.
Compact.
Features:
• Lightweight, easy to carry
• Hard-Wearing: static load capacity 200 kg
• Reliable: worktop (800x500mm) made of galvanized sheet iron, for use on one side, protected by an anti-oil and anti-petrol rubber cover
• Handle with rubber cover, for easy transportation
• An additional sturdy, reliable worktop, always within reach

Tool case with assortment of 163 GENERAL MAINTENANCE TOOLS
• Removable interior tool panel
• Integrated soft foam tray

 465x330x170 mm

Components
BW 42 Combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
BW 96BPC/SC9 Set of 9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
BW 111 Adjustable wrenches 250 mm 1
BW 1048 Slip joint pliers, boxed joints 250 mm 1
BW 1128BMX Electrician's scissors,
stainless steel blades,
with microteeth 150 mm 1
BW 1082BM Diagonal cutting nippers  160 mm 1
BW 1150BM Heavy-duty combination pliers  180 mm 1
BW 1166BM Extra-long needle knurled nose pliers  160 mm 1
1201E Screwdrivers for slotted head screws  2,5x50 - 3x75 - 4x125 - 5,5x150 - 6,5x150 - 8x150 mm 6
1202E Screwdrivers for cross head Phillips® screws  PH1x80 - PH2x100 mm 2
BW 1253 Mains testing screwdriver  3,5x100 mm 1
1209E/PZ  PZ1x80 - PZ2x100 mm 2
BW 1256/C21-1 22
BW 1370 300 Engineer's hammers 300 g 1
BW 1692/5 Measuring tapes 5 m 1
BW 1725CR Mini hacksaw frame 150 mm 1
1771 18 mm 1
BW 861/C61 Set of 60 bits
with magnetic bit holder,
in pocket-size case      61
BW 895/1 Socket holders
for items BW 861, BW 862, BW 866 1
BW 900 Hexagon hand sockets, 1/4"  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900/20 50 mm 1
BW 900/20L 100 mm 1
BW 900/25 Universal joint - 1/4" 1
BW 900/30 1/4" drive spinner handle 1
BW 900/42 1/4” drive sliding T-handle 110 mm 1
BW 900/55 Reversible ratchet, 1/4"  1
BW 920A Hexagon hand sockets, 1/2"  10-11-12-13-14-15-16-17-18-19-21-22-24 mm 13
BW 920/21 Extension bar - 1/2" 125 mm 1
BW 920/25 Universal joint, 1/2" 1
BW 910/16F Adaptor - F3/8"xM1/2" 1
BW 920/22 Extension bar - 1/2" 250 mm 1
BW 920/55 Reversible ratchet  1

Solid and fluid vacuum cleaner, 50 l, stainless steel drum
Blowing function
Non-marking wheels
TECHNICAL SPECIFICATIONS
• two-stage by-pass motor
• voltage: 220/240 V
• frequency: 50/60 Hz
• max. power: 1350 W
• airflow rate: 55 l/sec.
• max. suction power: 240 mbar
• max. drum capacity: 50 l, made of stainless steel
• acoustic emissions: <63 dB(A)
• cable length: 6 m
• trolley for accessories
STANDARD ACCESSORIES, Ø 45 mm
• 1 corrugated hose with ergonomic handle
• 2 stainless steel extension tubes
• 1 industrial brush frame
• 1 industrial section for carpets
• 1 industrial section with fluid collection hoses
• 1 flat nozzle

FILTERING SYSTEMS
• 1 filter paper bag
• 1 surface filter cartridge 5200 cm2, 12 μm nom.
• 1 anti-foam filter PPI 45/PPI 30

Parallel bench vices, forged
Fully steel cast. Milled and hardened jaw surface.
Front opening. High clamping depth.

Folding tool trolley
Main features:
• Loading platform made of reinforced polypropylene (PP), with non-slip coating and TPV inserts for corner protection
• Retractable handle for quick, compact storage
• Four non-marking castors, Ø 125 mm: 2 fixed and 2 steering with brakes
• Maximum capacity: 300 kg.
• Loading platform working width: 705 mm
• Loading platform depth: 480 mm
• Loading platform height: 200 mm

COMBO folding tool trolley
Main features:
• Ultracompact folding tool trolley
• Telescopic handle
• Dimensions when open: 485x520x1095 mm
• Dimensions when closed: 485x80x810 mm
• Dimensions of folding base: 485x350 mm
• Two puncture proof wheels, Ø 175

Electro-hydraulic motorcycle jack, 600 kg


Technical specifications:
• Electrical, mechanical and hydraulic safety devices
• Capacity: 600 kg
• Integrated electro-hydraulic unit: 230V - 50 Hz
• Hydraulic pump
• Controlled downward speed
• Safety fuses for protection in case of cable cuts
• Control push button panel
• CE-certified, TÜV-approved

Injection/extraction carpet/upholstery cleaner
Highly effective for
car seats and interiors
Ideal for deeply cleaning textile surfaces.
It dispenses pressure sprayed detergent and sucks it up with dirt, leaving surfaces almost dry.

Supplied accessories:
• 1 hose complete with ergonomic handle
• 1 dispenser unit
• 2 hard extensions
• 1 small spray extraction nozzle
• 1 big spray extraction nozzle
• 6 power cord locknuts


Technical data:
• Voltage: 230/240 V
• Frequency: 50/60 Hz
• Max. power: 1100 W
• Airflow rate: 58 l/sec.
• Max. drum capacity: 20 l
• Max. detergent tank capacity: 3 l
• Max. pump pressure: 7 bar
• Max. suction pressure: 21 kPa
• Pump power: 48 W

Digital automotive multimeter


Technical Data:
• RPM (tachometer):
For 2 and 4 cylinder engines
RPM4 600 - 4000 RPM
RPM4 600 - 12000 RPM (x10 RPM)
RPM2/DIS 300 - 4000 RPM
RPM2/DIS 300 - 6000 RPM (x10 RPM)
• Dwell angle: 4-8 CYL
• DC voltage: 400mV-4/40/400/1000V
• AC voltage: 4/40/400/700V
• DC current: 40/400mA-4/20A
• AC current: 40/400mA-4/20A
• Resistance: 400Ω-4/40/400kΩ-4/40MΩ
• Capacity: 40/400nF-4/40/100µF
• Frequency: 5/50/500Hz-50/500-10MHz
• Duty cycle: 0.1 % - 99.9%
• Pulse amplitude: 1 - 10ms
• Diode test: Test current 0.3mA
• Continuity: <150Ω - Test current <0.3mA
• Display: High-contrast, backlit 4-digit LCD
• Overvoltage: Category II 1000V
• Auto power off: 30 minutes
• Power supply: 1 9V battery (included)
• Inductive clamp (included)
• 2 tips (included)
• Soft cloth case (included)
• Operating manual

Electronic multipurpose battery charger, 12-24V
25A


Features:
• Backlit graphic display
• Maximum continuous charging current: 25A
• Charging and maintenance
• Protected against polarity reversal, short circuits
• 9 charging stages
• Floating system
• SHOW ROOM function (13,8V - 21A)
• SUPPLY function (14V - 21A)
• Memory saving function (13.8V - 21A)
• Battery recovery function
• Clamp holder
• Reclining fixing hook
• Supplied accessories: cable with clamp

Technical data:
• Power supply: 220-240V
• Power: 390W
• Charging current: 5-25A
• Battery type: Agm - Wet - Lithium (LiFePo4)
• Charging capacity: 5-550Ah
• Maintenance capacity: 5-800Ah
• Output voltage: 12-24V
• Minimum battery voltage: 0.8V
• Protection degree: IP20

Ultrasonic cleaning tank, 13 l
Ideal for injectors and EGR valves
With special degas function


Features:
• Ultrasonic cleaning relies on fluid heating to effectively clean spare parts and metal pieces in general (injectors, carburettors, valves etc.)
• Digital display for temperature and cleaning time selection
• Two cleaning modes: "soft" and "normal"
• For normal cleaning, just use water at a temperature of 50/60 °C
• For more accurate cleaning, add non-foaming detergent specific for ultrasonic tanks
• Using the degas mode speeds up air release throughout the tank, thereby improving ultrasonic cleaning efficiency

Technical Data:
• Tank capacity: 13 l
• Drain tap
• Power: 300 W
• Heating power: 400 W
• Temperature range: 0÷80 °C
• Cleaning time range: 0-99 minutes
• Frequency: 40 kHz
• Power supply: 220/230V
• Overall dimensions: 350x325x320 mm
• Tank dimensions: 325x235x145 mm
• Basket dimensions: 257x185x100 mm
• Maximum capacity: 12 kg

Automatic cable reel with LED inspection lamp, 100-240Vac
Features:
● With 230/12V safety transformer
● H05VV-F 2x1.0 mm² cable
● Coiled cable length: 15 m
● 1.5 m incoming cable with SCHUKO type socket
● Length of cable out of drum: 1 m
● Rack mechanism can be disabled to keep cable pulled
● Supplied with a 180° swivel bracket and an additional quick connection bracket

Auto-darkening LCD mask, for electrode welding; MIG/MAG; TIG and plasma. Solar cells power supply and lithium batteries for outstanding LCD filter life
● Viewing area: 98x43 mm
● Darkening shade: DIN 9-13, externally adjustable
● UV/IR protection
● Light to dark time: 1/25000 s
● Dark to light time: 0.25-1s
● Adjustable darkening sensitivity and delay
● Auto on/off
● Grinding feature
● Optimized shape to make it easier to breathe with pulled-down screen

Infrared thermal camera
Compact thermal camera for contactless temperature measurement, suitable for applications in building, mechanical, electric installation and heating industries.

Features:
• LCD TFT display, 2", 240x320
• Sensor, 32x32 pixels
• Acquisition frequency 7Hz
• Thermal sensitivity <347mK
• Automatic acquisition of hot and cold spots
• Camera for acquisition of images in BMP format (max. 100 images)
• Adjustable emissivity
• Power supply: 3 alkaline AAA batteries
• USB interface
• IP54
• Temperature range: -20 °C ÷ +600 °C
• Infrared band: 6.5÷14µm
• Visible/infrared image fusion: 0.5; 1; 2m
• Alarm function, selecting acceptable maximum and minimum temperatures

Portable induction heater
Quick loosening of nuts and bolts.
Maximum safety without using flames.


Heats and loosens bolts, hubs and bearings without using flames.
Allows any type of ferromagnetic metal to be heated.

Standard equipment:
• Two front attachable coils, Ø 19 and 26 mm, for loosening nuts
• One flat coil for heating surfaces
• One flexible coil, 800 mm long
• Supplied in plastic case

Technical data:
• Input voltage: 230V AC, 50/60 Hz
• Input current: max. 7,5A
• Power: max. 1.75 kW

Optional Equipment:
• Coils are also available in other sizes

Benefits:
• Time saving: quick, extremely accurate heating
• Fire safety: does not produce flames, maximum operator safety
• Functional: can be used with one hand, and coils can be easily interchanged

Fields of Application:
• Automotive industry
• Industrial maintenance
• Aviation industry
• Naval industry
• Petrochemical industry

480x370x130 mm -  4,5 kg

Makes it possible to work on vehicles that are high from the ground and have a long shock absorber travel:

Features:
• Controlled descent speed
• Quick approach pedal
• Nylon wheels

Kit contents:
• round ball head rod, Ø 31 mm, length 110 cm
• tip rod, length 62 cm
• whale tail tip rod, length 112 cm
• hook tip rod, length 27 cm
• flat round head rod, length 50 cm
• round ball head rod, Ø 19 mm, length 52 cm
• whale tail head rod, length 27 cm
• round whale tail head rod, length, 28 cm
• fabric bag with handles

Main features
• Battery voltage: 12V
• Battery capacity: 2Ah
• Energy capacity: 24Wh
• Battery type: Li-ion

Digital brushless motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case with 2 lithium ion batteries (4 Ah) and quick charger

Technical features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm


 5,5 kg
 490x370x125 mm

• Digital BRUSHLESS motor
Significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button

• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case, without batteries and charger

Main features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm

Ideal for drilling in different materials, including wood, metal, plastic, masonry and concrete

Powerful 910W motor
Linear, compact design with ergonomic, non-slip handle

Metal auto-chuck, 13 mm
Reversible variable speed
Gear case made entirely from metal
Switch lock for improved comfort of use
Main features:
• Max. drilling diameter in wood: 32 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm
• No-load speed: 0-2800 rpm
• Tangle-free power supply cord length: 4 m

Supplied accessories:
• Metal auto-chuck, 13 mm
• Additional side handle that can be rotated 360°
• Depth rod


 4,3 kg
 420x320x120 mm

Ultracompact: no more than 160 mm in length; ultralightweight: no more than 1 kg, with battery, and perfectly balanced.
Ideal for jobs in small areas, provides high torque (80 Nm), one-handed operation.

Features:
• 1/4" hexagon drive with locknut
• belt clip (right/left side)
• front LED
• selector switch, screwing-unscrewing-locking modes (for transportation)
• ergonomic nonslip handle
• gearcase made entirely of metal
• 2Ah batteries with charge indicator on impact wrench body
• supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (50 min)

Ultracompact: no more than 170 mm in length; ultralightweight: no more than 1.1 kg, with battery, and perfectly balanced

Features:
• Double mechanical speed with steel gears and 20-position clutch
• Torque up to 30 Nm and 1300 rpm (400 rpm in 1st gear); drills diameters up to 10 mm in steel and 20 mm in wood
• 2Ah batteries and charge indicator on drill body
• Ergonomic nonslip handle
• Front LED
• 10-mm autochuck
• Belt clip (right/left side)
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (50 min)

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21 mm 16
96T offset hexagon key wrenches  2-2,5-3-4-5-6-7-8 mm 8
97TTX drivers for Torx® head screws, with handles  TX10-TX15-TX20-TX25-TX30 5
1084 Heavy-duty diagonal cutting nippers  160 mm 1

Main features:
• 6 fully removable drawers (588x367 mm), with ball bearing slides:
4 drawers 70 mm high
1 drawer 140 mm high
1 drawer 280 mm high

Features:
• ABS reinforced worktop, solid and sturdy
• Multi-purpose top with anti-fall edges and 8 holes for accommodating screwdrivers
• 4 castors Ø 125 mm - 2 fixed and 2 steering (one with brake)
• Front centralised safety lock
• Static load capacity: 800 kg

Assortment of 24 plumbing tools included.

Tools Bag Features:
• Sturdy PVC cover, waterproof
• Reinforcement seams around the entire perimeter
• Double clip buckle closure
• Double interior handle for a safe, balanced hold
• Zipped document pocket
• Dimensions: 450x180x20 0mm
• Weight: 1,4 kg

Features:
• Sturdy PVC cover, waterproof
• Reinforcement seams around the entire perimeter
• Double clip buckle closure
• Double interior handle for a safe, balanced hold
• Zipped document pocket

Mobile roller cab with 7 drawers, with wood worktop and anti-tilt system, long model
Work surface increased by no less than 25%!
Long model with 7 fully removable drawers (882x367 mm), with ball bearing slides:
• 5 drawers, 70 mm high
• 1 drawer, 140 mm high
• 1 drawer, 210 mm high

• Multi-ply wood worktop with holes for a vice 1599F/100 or 1599GI/100 (to be ordered separately)
• Sturdy nylon front, with built-in label holder
• Drawer bases protected by foamed rubber mats
• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 1.100 kg
• Built-in side bottle holder (can be applied on both sides)
• Built-in paper roll holder
• Each drawer can accommodate up to 6 EVA foam or ABS thermoformed trays


Following accessories can be added:
• perforated tool panel with supports 2400 RSC24AXLP/PF
• computer bracket 2400 RSC24/SPC
• side tool tray 2400 RSC24AXLP/VL
• waste bin 2400 RSC24AXLP/CPR
• folding side shelf 2400 RSC24/MP
 105 kg

008620960 862XP/A16
 PH2(x2)-PH3
 PZ2(x2)-PZ3
 T20-T25(x2)
T30(x2)-T40(x2)
 4-5-6 mm

900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
96BPC/SC9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/16 adaptor, 1/4” female and 3/8” male drives  1/4 -  3/8 1
900/... 1/4” drive extension bar 50-100-150 mm 3
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
910A 3/8" hexagon hand sockets  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm 17
910/15 adaptor, 3/8” female and 1/4” male drivers  3/8 -  1/4 1
910/16 adaptor, 1/2" female and 3/8" male drives  3/8 -  1/2 1
910/21 3/8" extension bar 125 mm 1
910/22 3/8" extension bar 250 mm 1
910/25 3/8" drive universal joint 1
910/42 3/8" drive sliding T - handle 1
910/55 3/8" drive reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 17
920/15 adaptor, 1/2” female and 3/8” male drives  1/2 -  3/8 1
910/25 3/8" drive universal joint 1
920AN 1/2” wobble extension bar 125 - 250 mm 2
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
956E 3/8" square drive spark plug sockets  16-17,8-20,8 mm 3
910AL hexagon hand sockets  8-9-10-11-12-13-14-15-16-17-19-21-22 mm 13
920PE 1/2" socket drivers for hexagon screws  5-6-6L-7-8-8L-10-10L-12-12L mm 10
920FTX 1/2" sockets for Torx® head screws  E12-E14-E16-E18-E20-E22-E24 7
920TX 1/2” drive, socket drivers for Torx® head screws  T20-T25-T27-T30-T30L-T40-T40L-T45-T50-T50L-T55-T60-T60L 13
920XZN 1/2" socket drivers with XZN® profile  5-6-6L-8-8L-10-10L-12L mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32 mm 16
1692/5 measuring tape 5 m 1
42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-24-27 mm 18
90 double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm 7
123Q1/4 quick release adaptor, 1/4", for 10 mm ratcheting wrenches 1
123Q3/8 quick release adaptor, 3/8", for 13 mm ratcheting wrenches 1
123Q1/2 quick release adaptor, 1/2", for 19 mm ratcheting wrenches 1
142 reversible ratcheting combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
860MIX/A31 bits with magnetic quick release bit holder in plastic case      31
1048N slip joint pliers, slip-proof PVC coated handles 250 mm 1
1082BM Diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1162BM Extra-long flat knurled nose pliers  160 mm 1
1290 screwdrivers for cross head Phillips® screws  3x75-4x100-5,5x100-6,5x150-8x150 mm 5
1290N screwdriver for slotted head screws, extra-short series  6,5x30 mm 1
1292 screwdrivers for cross head Phillips® screws  4,5x80-6x100-8x150 mm 3
1292N screwdriver for cross head Phillips® screws, extra-short series  6x30 mm 1
1297TX drivers for Torx® head screws, with handles  T20-T25-T27-T30 4

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm 22
55 double open end wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm 8
96/SC9 offset hexagon key wrenches  1,5÷10 mm 9
867PE hexagon bits  4-5-6-7-8-10-12 mm 7
867PE/L hexagon bits  4-5-6-7-8-10-12 mm 7
867XZN bits with XZN® profile  5-6-8-10-12 mm 5
867XZN/L bits with XZN® profile  5-6-8-10-12 mm 5
867TX bits for Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867TX/L bits for Torx® head screws  T25-T30-T40-T45-T50-T55 6
867RTX bits for Tamper Resistant Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867/1 bit holder sockets for item 867 1
867/2 bit holder sockets for item 867 1
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/20 1/4” drive extension bar 50 mm 1
900/20L 1/4” drive extension bar 100 mm 1
900/21 1/4” drive extension bar 150 mm 1
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920/15 adaptor, 1/2” female and 3/8” male drives 1
920/25 1/2" drive universal joint 1
920AN/125 1/2” wobble extension bar 125 mm 1
920AN/250 1/2” wobble extension bar 250 mm 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
920FTX 1/2" sockets for Torx® head screws  10-12-14-16-18-20-22-24 mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22 11
1084BM Heavy-duty diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1166BM Extra-long needle nose pliers  160 mm 1
1201E screwdriver for slotted head screws  2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN screwdriver for slotted head screws,
extra-short series  4x30 mm 1
1202E screwdriver for cross head Phillips® screws  PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN screwdriver for cross head Phillips®
screws, extra-short series  PH1X30 mm 1
1207E/TX screwdrivers
for Torx® head screws, with handles  T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40-T45 12
1253 mains testing screwdriver  1
35 flat chisels, ribbed type 100-200 mm 2
1370 engineer’s hammer 300 g 1
1390 soft face hammer Ø 35 mm 1

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm 22
55 double open end wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm 8
96/SC9 offset hexagon key wrenches  1,5÷10 mm 9
867PE hexagon bits  4-5-6-7-8-10-12 mm 7
867PE/L hexagon bits  4-5-6-7-8-10-12 mm 7
867XZN bits with XZN® profile  5-6-8-10-12 mm 5
867XZN/L bits with XZN® profile  5-6-8-10-12 mm 5
867TX bits for Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867TX/L bits for Torx® head screws  T25-T30-T40-T45-T50-T55 6
867RTX bits for Tamper Resistant Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867/1 bit holder sockets for item 867 1
867/2 bit holder sockets for item 867 1
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/20 1/4” drive extension bar 50 mm 1
900/20L 1/4” drive extension bar 100 mm 1
900/21 1/4” drive extension bar 150 mm 1
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920/15 adaptor, 1/2” female and 3/8” male drives 1
920/25 1/2" drive universal joint 1
920AN/125 1/2” wobble extension bar 125 mm 1
920AN/250 1/2” wobble extension bar 250 mm 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
920FTX 1/2" sockets for Torx® head screws  10-12-14-16-18-20-22-24 mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22 11
1084BM Heavy-duty diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1166BM Extra-long needle nose pliers  160 mm 1
1201E screwdriver for slotted head screws  2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN screwdriver for slotted head screws,
extra-short series  4x30 mm 1
1202E screwdriver for cross head Phillips® screws  PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN screwdriver for cross head Phillips®
screws, extra-short series  PH1X30 mm 1
1207E/TX screwdrivers
for Torx® head screws, with handles  T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40-T45 12
1253 mains testing screwdriver  1
35 flat chisels, ribbed type 100-200 mm 2
1370 engineer’s hammer 300 g 1
1390 soft face hammer Ø 35 mm 1

For precision jobs.
In compact anodized aluminium case.


 200 g
 130x60x35 mm -  200 g

C20L:  5,4 kg

Features:
• 3 tops covered in antislip ribbed rubber
• Ergonomic handle
• Two fixing options for central worktop
• Four castors Ø 100 mm:
• 2 fixed and 2 steering (1 with brake)
• Static load capacity: 200 kg (distributed between3 shelves)

016870150 1687/S4
set of 4 engineer's precision scribers, with handles
(items 1687A, 1687AC, 1687U, 1687D)
1687A-1687AC
1687D-1687U

BW 928A Hexagon hand sockets, 3/4"  22-24-27-30-32-34-36-38-41-46-50-55 mm 12
BW 928/55 Reversible ratchet, 3/4"  500 mm 1
BW 928/25 Universal joint - 3/4" 1
BW 928/20 Extension bar - 3/4" 100 mm 1
BW 928/21 Extension bar - 3/4" 200 mm 1
BW 928/42 3/4” drive slide T-handle,
chrome-plated 455 mm 1

Ideal for diagnostics
Useful and functional
Can be used as a mobile workstation for diagnostic tools, laptops, testers and battery chargers.


Specifications:
• Painted sheet metal frame: unparalleled firmness and sturdiness
• Ergonomic handle
• 2-level top
• Pull-out drawer for housing a mini keyboard
• 2 central shelves with adjustable position and 1 fixed low shelf
• 4 useful side cable reels made of plastic - 2 useful side containers
• 2 fixed rear castors Ø 160 mm
• 2 steering front castors Ø 100 mm (one with brake)
• Weight: 43 kg

• 8 drawers (588x367 mm),
with ball bearing slides:
7 drawers, 70 mm high
1 drawer, 210 mm high
• Drawer bases protected
by foamed rubber mats
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 800 kg
• Thermoplastic worktop
• Built-in side bottle holder


BW 1253 Mains testing screwdriver   0,5x100 mm 1
BW 42 Combination wrenches  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32 mm 22
BW 96BPC/SC9 Set of 9 ball head offset hexagon key wrenches   1,5-2-2,5-3-4-5-6-8-10 mm 9
BW 900 Hexagon hand sockets, 1/4"   4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900L Hexagon hand sockets, long series, 1/4"    4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900FTX Hand sockets for Torx® head screws, 1/4"    E4-E5-E6-E7-E8-E10 6
BW 900ME Socket drivers for hexagon screws, 1/4"    3-4-5-6-7-8 mm 6
BW 900TX Socket drivers
for Torx® head screws, 1/4"    T06-T07-T08-T09-T10-T15-T20-T25 8
BW 900LP Socket drivers for slotted head screws, 1/4"    0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
BW 900PH Socket drivers for
cross head
Philips® screws, 1/4"    PH0-PH1-PH2-PH3 4
BW 895/1 Socket holders
for items BW 861, BW 862, BW 866   1
BW 900/20 50 mm 1
BW 900/20L 100 mm 1
BW 900/25 Universal joint - 1/4" 1
BW 900/30 1/4" drive spinner handle 150 mm 1
BW 900/42 1/4” drive sliding T-handle 115 mm 1
BW 900/55 Reversible ratchet, 1/4"   150 mm 1
BW 910A Hexagon hand sockets, 3/8"    6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm 18
BW 910AL Hexagon hand sockets, long series, 3/8"    8-10-11-12-13-14-17-19 mm 8
BW 910FTX Hand sockets for Torx® head screws, 3/8"    E6-E7-E8-E10-E11-E12-E14 7
BW 910PE Socket drivers for hexagon screws, 3/8"    4-5-6-7-8-9-10 mm 7
BW 910TX Socket drivers for Torx® head screws, 3/8"    T15-T20-T25-T27-T30-T40-T45 7
BW 910/21  75 mm 1
BW 910/22  150 mm 1
BW 910/25 Universal joint, 3/8"  1
BW 920/15 Adaptor - F1/2"xM3/8"  1/2" -  3/8" 1
BW 1256/C21-1  4 mm 22
BW 55 Double open end wrenches  6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm 11
BW 90 Double ended deep offset ring wrenches  6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm 11
BW 97TX/SC8 Set of 8 offset key wrenches,
for Torx® head screws,
burnished, with plastic support  T9-T10-T15-T20-T25-T27-T30-T40 8
BW 910/16F Adaptor - F3/8"xM1/2"  3/8" -  1/2" 1
BW 920A Hexagon hand sockets, 1/2"    8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32 mm 20
BW 920FTX Hand sockets for Torx® head screws, 1/2"    E10-E12-E14-E16-E18-E20-E22-E24 8
BW 920PE Socket drivers for hexagon screws, 1/2"    5-6-7-8-9-10-12-14 mm 8
BW 920PE-L Socket drivers for hexagon screws, long series, 1/2"    5-6-7-8-9-10-12-14 mm 8
BW 920TX Socket drivers for Torx® head screws, 1/2"    T27-T30-T40-T45-T50-T55-T60 7
BW 920TX-L Socket drivers for Torx® head screws, 1/2"    T30-T40-T45-T50-T55-T60-T70 7
BW 920AL Hexagon hand sockets, long series, 1/2"    10-12-13-14-15-16-17-18-19-21-22-24-27-30-32 mm 15
BW 920/21 Extension bar - 1/2" 125 mm 1
BW 920/22 Extension bar - 1/2" 250 mm 1
BW 920/25 Universal joint, 1/2" 1
BW 920/55 Reversible ratchet  260 mm 1
BW 1048 Slip joint pliers, boxed joints 250 mm 1
BW 1052 Adjustable self-locking pliers,
concave jaws 190-240 mm 2
BW 1082BM Diagonal cutting nippers   160 mm 1
BW 1098 Construction worker’s pincers 220 mm 1
BW 1128BMX Electrician's scissors,
stainless steel blades,
with microteeth 150 mm 1
BW 1150BM Heavy-duty combination pliers   180 mm 1
BW 1166BM Extra-long needle knurled nose pliers   200 mm 1
BW 1168BM Extra-long bent needle knurled nose pliers   200 mm 1
BW 30 Drift punches Ø 2-3-4 mm 3
BW 31 Pin punches Ø 2-3-4-5-6-8 mm 6
BW 32 Centre punches Ø 4 mm 1
BW 34 Flat chisels 150-175-200 mm 3
BW 36 Cape chisels 130 mm 1
BW 1370 Engineer's hammers  500 g 1
BW 1390 Soft face hammer, plastic faces Ø 35 mm 1
BW 1692/3 Measuring tapes 3 m 1
BW 1712T Telescopic magnet 1
BW 1719BMA8/Q Second-cut square files, with handles  200 mm 1
BW 1719BMA8/T Second-cut triangular files, with handles ▲ 200 mm 1
BW 1719BMA8/P Second-cut flat files, with handles ▌200 mm 1
BW 1719BMA8/M Second-cut half-round files, with handles  200 mm 1
BW 1719BMA8/R Second-cut round files, with handles  200 mm 1
BW 1737NX Brake shoe cleaning brush 270 mm 1
1201E Screwdrivers for slotted head screws   2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN Screwdrivers for slotted head screws   4x30 mm 1
1202E Screwdrivers for cross head Phillips® screws   PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN Screwdrivers for cross head Phillips® screws   PH1x30 mm 1
1207E/TX Evox screwdrivers for Torx® head screws   T06-T07-T08-T09-T10-T15-T20-T25-T27-T30-T40-T45 12
1032 Internal circlip pliers, straight pattern  19÷60 mm 1
1034 Internal circlip pliers, bent pattern  19÷60 mm 1
1036 External circlip pliers  19÷60 mm 1
1038 External circlip pliers, bent pattern  19÷60 mm 1
BW 861/C61 Set of 60 bits
with magnetic bit holder,
in pocket-size case      61
1771 1
BW 910/55 Reversible ratchet  205 mm 1
943E Hexagon nut spinners with handles  6-7-8-9-10-11-12-13 mm 8
BW 96T Offset hexagon key wrenches, with high torque handles 2-2,5-3-4-5-6-7-8 mm 8
BW 1149F Front wire stripping pliers, self-adjusting 175 mm 1
BW 1602 Crimping pliers
for insulated terminals 0,75÷6  mm² 1
BW 1603 Crimping pliers for non-insulated
terminals 1,25÷5,5  mm² 1
BW 1606T Crimping pliers for tubular terminals, 4-sided crimping 0.1÷10 mm² 1
BW 1608 Crimping pliers for insulated terminals,
with pressure regulator 0,5÷6  mm² 1
BW 141 Ratcheting combination wrenches 8-9-10-11-12-13-14-15-17-19 mm 10
BW 410/SP19 Set of rolled twist drills,
in plastic case Ø 1÷10 mm x 0.5 mm 19
BW 1725CR Mini hacksaw frame 260 mm 1
BW 97TTX Offset key wrenches with handles for Torx® head screws T8-T9-T10-T15-T20-T25-T27-T30-T40 9
BW 1682 Flexible graduated rules 300 mm 1
BW 1650 Sliding gauges 150 mm 1
BW 1380 Lump hammer 1000 g 1
BW 720 Impact sockets, 1/2"  10-12-13-15-17-19-21-24 mm 8
BW 720L Impact sockets, long series, 1/2"  17-19-21-22 mm 4
BW 720/21 125 mm 1
BW 900/16 Adaptor - 1/4"  1/4" -  3/8" 1
BW 910/15 Adaptor - F3/8" xM1/4  3/8" -  1/4" 1
BW 920/16 Adaptor - F1/2"xM3/4"  1/2" -  3/4" 1
BW 943FL Flexible hexagon nut spinners
with handles  6-7-8 mm 3
BW 1687D 153 mm 1
BW 1687U 153 mm 1
BW 1687A 153 mm 1
BW 1687AC 153 mm 1
BW 1725 Hacksaw frame 420 mm 1
BW 1833S High-brightness LED torch,
made of sturdy anodized aluminium,
up to 200 lumens 200 lumen 1

The evolution of the C24S roller cab!
Reinforced worktop and a wide range of dedicated accessories!
Available in 7 different colour combinations!
New ABS reinforced worktop, designed to support tool chests RSC22, RSC23, RSC23C and RSC23T.
Main features:
• 7 fully removable drawers (588x367 mm), with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Multi-purpose top with anti-fall edges and eight holes for accommodating screwdrivers
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Built-in bottle holder (can be applied on both sides).
• The following accessories can be added:
wood worktop 2400 RSC24/PL
perforated tool panel 2400 RSC24/PF
folding shelf 2400 RSC24/MP
computer wall bracket 2400 RSC24/SPC
document holder 2400 RSC24//PD (available in anthracite grey or black)
paper roll holder 2400 RSC24/PC (available in anthracite grey or black)
• Drawer bases protected by foamed rubber mats.
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays.

Clock complete with thermometer and hygrometer, 26 cm in diameter

For mechanics, industrial maintenance and car repair professionals as well as for anybody whose hobby is much more than just a diversion.

910AL hexagon hand sockets  8-9-10-11-12-13-14-15-16-17-19-21-22 mm 13
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32 mm 16
920FTX 1/2" sockets for Torx® head screws  E12-E14-E16-E18-E20-E22-E24 7
920PE 1/2" socket drivers for hexagon screws  5-6-6L-7-8-8L-10-10L-12-12L mm 10
920TX 1/2” drive, socket drivers for Torx® head screws  T20-T25-T27-T30-T30L-T40-T40L-T45-T50-T50L-T55-T60-T60L 13
920XZN 1/2" socket drivers with XZN® profile  5-6-6-6L-8-8L-10-10L-12L mm 8
42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-24-27 mm 18
90 double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x1516x17-18x19 mm 7
123Q1/4 quick release adaptor, 1/4", for 10 mm ratcheting wrenches 1
123Q3/8 quick release adaptor, 3/8", for 13 mm ratcheting wrenches 1
123Q1/2 quick release adaptor, 1/2", for 19 mm ratcheting wrenches 1
142 reversible ratcheting combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
96BPC/SC9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
895/1 socket holder 1/4-1/4 1
895/3 socket holder 1/4-3/8 1
895/6 socket holder 5/16-1/2 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,51,2x8 mm 4
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/16 adaptor, 1/4” female and 3/8” male drives 1/4-3/8 1
900/... 1/4” drive extension bar 50-100-150 mm 3
900/25 1/4" drive universal joint 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
900BG/30 1/4" drive spinner handle 1
910A 3/8" hexagon hand sockets  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm 17
910/15 adaptor, 3/8” female and 1/4” male drivers 3/8-1/4 1
910/16 adaptor, 1/2" female and 3/8" male drives 3/8-1/2 1
910/21 3/8" extension bar 125 mm 1
910/22 3/8" extension bar 250 mm 1
910/25 3/8" drive universal joint 1
910/42 3/8" drive sliding T - handle 1
910/55 3/8" drive reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-1011-12-13-4-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920AN 1/2” wobble extension bar 125-250 mm 2
920/15 adaptor, 1/2” female and 3/8” male drives 1/2-3/8 1
920/25 1/2" drive universal joint 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
956E 3/8" square drive spark plug sockets  16-17,8-20,8 mm 3
860MIX/A31 bits with magnetic quick release bit holder in plastic case      31
1048N slip joint pliers, slip-proof PVC coated handles 250 mm 1
1082BM Diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1162BM Extra-long flat knurled nose pliers  160 mm 1
1290 screwdrivers for cross head Phillips® screws  3x75-4x100-5,5x100-6,5x150-8x150 mm 5
1290N screwdriver for slotted head screws, extra-short series  6,5x30 mm 1
1292 screwdrivers for cross head Phillips® screws  PH1-PH2-PH3 3
1292N screwdriver for cross head Phillips® screws, extra-short series  PH2 1
1297TX drivers for Torx® head screws, with handles  T20-T25-T27-T30 4
31 pin punches 2-3-4-5-6-8 mm 6
32 centre punch 4 mm 1
34 flat chisels 125-150-75 mm 3
36 cape chisels, standard type 125 mm 1
1370 engineer’s hammer 500-1000 g 2
1712TF telescopic magnet with flexible head 1
1390 soft face hammer Ø 35 mm 1
1692 measuring tape 5 m 1
1032 circlip pliers straight, internal  180 mm 1
1034 circlip pliers bent, internal  170 mm 1
1036 circlip pliers straight, external  175 mm 1
1038 circlip pliers bent, external  175 mm 1
1177BM smooth half - round long needle nose pliers  140 mm 1
1188BM diagonal cutting nippers  125 mm 1
1257LP micro-screwdrivers for slotted head screws  2,0-2,5-3,0-3,5 mm 4
1257PH micro-screwdrivers for cross-head Phillips® screws  0-00 2
97TTX drivers for Torx® head screws, with handles  T10-T15-T20-T25-T27-T30-T40-T45-T50 9
1052 self - locking pliers 240 mm 1
1058 adjustable self locking pliers, long jaws 175 mm 1
1481PL/A plastic hose pliers 1
1481PL/B plastic hose pliers 1
1481PL/C plastic hose pliers 1
1650 sliding gauge 1
1708/20 metric feeler gauge 1
1716P packing scraper 1
80 double swivel end socket wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm 7
920/36A 1/2” drive swivel handle 1
965 pry bar with handle 450 mm 1
1715 telescopic joint inspection mirror 670 mm 1
1719BMA8/M second cut files 200 mm 1
1719BMA8/P second cut files 200 mm 1
1719BMA8/Q second cut files 200 mm 1
1719BMA8/R second cut files 200 mm 1
1719BMA8/T second cut files 200 mm 1
1737NX Steel wire brush 1

• Microprocessor for managing welding parameters
• Contact and manual welding cycle start
• Automatic spot welding time setting function
• Supplied with quick coupling gun and 2.2-m-long ground cable

Accessory kit contents:
• extractor hammer
• three-pointed washer head
• 10 three-pointed washers
• carbon electrode
• squashing electrode


Technical data:
• Power supply: 230V
• 50% power: 2.5 KVA
• Power peak: 13 KVA
• Amp output: 2850 (2%) A
• Max. Amp output : 3200 A
 kg 23

The wrench that does not require releasing tension after use. 100% Italian-made, it is ideal for controlled tightening of screws/bolts.


ZERO-RESET TECHNOLOGY: Based on higher-performance materials and improved heat treatment of both the spring and the component parts of the adjustment system, the wrench no longer requires releasing tension after use.
EASY SETTINGS: The graduated vernier scale allows minimum interval fractions to be set up (in tenths of Nm).
IMPROVED VISIBILITY: Double graduation in Nm for clearer, simpler torque visibility and easy, prompt settings.
PUSH-THROUGH RATCHET: 72 tooth mechanism, for quick, accurate wrench operation, ensuring a take-up angle of no more than 5°.
BI-MATERIAL HANDLE: Ergonomic handle, for a safe, comfortable hold. Made from materials resistant to fuel, oil and industrial liquids.
TORQUE LOCKING PUSH-PULL SYSTEM: Lock/release knob with high-visibility red ring in released position. Torque is set by rotating the handle.
CLICK MECHANISM: The mechanical click can be heard and touched.
100% ITALIAN-MADE: Entirely designed and manufactured in Italy, assembled, tested and certified at Beta's Dynalab, at our headquarters in Sovico, which translates into top-quality torque wrenches.

Professional manual pallet jack for handling differently sized pallets. The frame provides remarkable firmness and sturdiness, for intensive daily use.

Features:
• 2 steering wheels, 200x50 mm, made of PU
• double front rollers, 80x70 mm, made of PU
• pallet access entry and exit rollers
• depth stop notch
• lowering speed control valve
• safety overload valve
• 3-position operating lever


Technical data:
• maximum capacity: 2500 kg
• overall length: 1550 mm
• fork length: 1150 mm
• fork width: 540 mm
• individual fork width: 160 mm
• lever height: 1230 mm
• max. lifting height: 115 mm
• pallet storage corridor: 800x1200 lengthwise: 1805 mm
• turning radius: 1347 mm
 69,5 kg

A professional solution, ideal for light carpentry and maintenance jobs, the inverter welding machine, 1860BHT/160A, stands out as a first-rate item developed from the merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A.
This DC-powered inverter welding machine can be used for both MMA welding with rutilic, basic and stainless steel electrodes, and TIG steel welding.
Compact and lightweight, the welding machine supports the arc force, STICK/TIG (lift arc), hot start, anti-sticking and thermostatic protection features.


Features:
• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
35% - 160 A
60% - 130 A
100% - 95 A
• Protection: IP23S
• Usable electrodes: Ø 1.6 - 4 mm rutilic, basic, stainless steel.
• Supplied with 25 mm² cables
• Dimensions: 360x140x230 mm
• Welding machine weight: 6.2 kg
• Torch length: 4 m

Main features:
• LED charge level indicator
• Rated input voltage: 110V-240V ~ 50/60Hz
• Output voltage: 20V
• Charging current: 6A
• Rated input power: 145W

20V 2Ah battery charging time: 45 min
20V 4Ah battery charging time: 90 min
20V 6Ah battery charging time: 120 min

With button and 3 coloured LED charge level indicators.

Main features:
• Battery voltage: 20V
• Battery capacity: 2Ah
• Energy capacity: 40Wh
• Battery type: Li-ion

With button and 3 coloured LED charge level indicators.

Main features:
• Battery voltage: 20V
• Battery capacity: 4Ah
• Energy capacity: 80Wh
• Battery type: Li-ion

With button and 3 coloured LED charge level indicators.

Features:
• Battery voltage: 20V
• Battery capacity: 6Ah
• Energy capacity: 120Wh
• Battery type: Li-ion

Multifunctional audio entertainment: digital (DAB; BT) and conventional FM radio.
Suitable for use at construction sites or for leisure.

Features:
• Sturdy radio with compact, modern, design, degree of protection IP54
• Powerful stereo sound provided by two powerful 16W side loudspeakers
• Built-in alarm function
• Complete with carrying handle and shockproof corner protection
• With AUX connection and protected USB connector for phone connection and charge
• Can be used with Beta's 20V batteries (optional) or power supply cord (included).
• FM radio frequency range: 87.5 – 108 MHz
• DAB radio frequency range: 174 – 240 MHz
• Number of FM and DAB stored stations: 30
• Loudspeaker power: 16 W
• Rated voltage of battery (optional): 20 V
• Radio dimensions: 180 x 205 x 305 mm
• Radio weight (without battery): 3.2 kg

Specifications:
• Maximum capacity: 1 t
• 4 loading positions: 300-600-800-1000 kg
• With load limiting valve and chrome-plated stand
• Controlled descent speed
• Nylon wheels
• Maximum height: 2420 mm

Digital BRUSHLESS motor for increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Main features:
• Protection against accidental restart
• Additional handle, can be placed on both sides
• Tool-less disc cover (quick release)
• Spindle lock device for quick disc changes
• Lock on/off slide switch
• Air vents protected against dust infiltration and providing optimal cooling
• Supplied in a hard case with 2 4 Ah lithium ion batteries and a quick charger

Technical data:
• Disc diameter (not included): 125/115 mm
• Free speed: 8.000 rpm
• Tool spindle thread: M14
• Tangle-free cable length: 4 m

Digital BRUSHLESS motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 different torque settings and rpms in screwing mode
• Up to 600 Nm unscrewing torque
• 1/2" male square drive with bush retaining ring
• Gear case made entirely from metal
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)

Tightening
3 torque settings and rpms (low - medium - height) available):
1: 200 Nm; 1000 rpm
2: 350 Nm; 1500 rpm
3: 550 Nm; 1800 rpm

Untightening
1: 600 Nm: impact wrench applies maximum torque non-stop (free unscrewing)
2: 600 Nm - Autostop: impact wrench applies maximum torque until nut is fully unscrewed, and then stops automatically (single impact unscrewing)

Supplied in handy hard case complete with 2 lithium ion batteries (4 Ah) and quick charger.
Battery voltage 20 V
Battery capacity 4.0 Ah
Drive 1/2" square
Max. tightening torque (Nm) 200 / 350 / 550
Max. untightening torque (Nm) 600
Weight without battery 2.3 kg

Digital brushless motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case with 2 lithium ion batteries (4 Ah) and quick charger

Technical features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm

Workshop equipment Beta RSC50.
The new range of workshop equipment is characterised by attention to detail and refined finishes.

Comprehensive combination comprising:
• 1 single-door tool cabinet (RSC50 A1)
• 1 750-mm-long worktop (RSC50 PG/1-0,7MT)
• 1 2.240-mm-long worktop (RSC50 PG/3-2,2MT)
• 1 mobile roller cab with 7 drawers (RSC50 C7)
• 1 fixed module with 4 drawers (RSC50 M4)
• 1 fixed module with 7 drawers (RSC50 M7)
• 1 fixed service module (RSC50 MS-AVV) with compressed air hose reel item 1900S 8x10 (included)
• 1 tool wall system with aluminium shutter and framework (RSC50 PS)
• 2 wall-mounted cabinets (RSC50 PM)
• 2 upper perforated tool panels (RSC50 PFS)
• 2 lower perforated tool panels (RSC50 PFI)
• 2 pairs of right/left uprights (RSC50 P/2MDX-SX)
• 1 two-door tool cabinet (RSC50 A2)

Design and Quality Made in Italy

The new workshop equipment is designed and manufactured in Beta's Italian factories, with the utmost attention to detail and choice of quality materials. The new range comprises preassembled combinations, developed by Beta for professionals; alternatively, you can design your workplace on your own, choosing from many under-bench modules, wall-mounted cabinets and furnishing accessories.


Deep and sturdy work surface
New sturdy and very deep worktop (63 cm) for a large, comfortable and functional work surface. It can be fitted with a vice, thereby allowing heavy-duty jobs to be carried out.

Wide range of compatible assortments
The drawers in Beta’s standard dimensions (588x367 mm) can accomodate the numerous tool modules, which are available in both soft and hard versions, made from EVA and ABS respectively.

Customisable modules
The customized colours of the drawer handles and lights under the worktops and wall-mounted cabinets result in unique workshop equipment.

Simple, Quick Installation
RSC50 range’s modules have been conceived and designed so that they can be assembled intuitively and quickly. In fact, thanks to optimized production of the various parts of the range, assembly of the RSC50 equipment involves fewer steps than other lines of workshop equipment.

Beta C45PRO, the professional, sturdy, tidy workshop equipment.
Beta C45PRO is the new line of workshop equipment to organise the workstation in the best possible way according to the space available and the needs of use. The range includes predetermined combinations that can be modified and expanded over time according to requirements.

Combination comprising:

• 2 perforated tool panels (C45PRO PF)
• 2 wall-mounted cabinets (C45PRO PM)
• 2 wall brackets, wide type (C45PRO SL)
• 1 wall bracket, narrow type (C45PRO SS)
• 1 single-door cabinet (C45PRO AS1)

• Fixed module with 7 drawers and stainless steel coated MDF worktop (C45PRO M7A/X):
• 1 drawer, 1248x406 mm
• 6 drawers, 782x406 mm
5 drawers, 65 mm high
1 drawer, 145 mm high
• 1 storage compartment with intermediate shelf and door

Design

The C45PRO workshop equipment is characterised by the unique Beta style. The new colour, anthracite grey, the new matt finish, the new aluminium handle with orange insert and Beta's chrome plated logos make the C45PRO workshop equipment look modern and even more captivating.


Beta Quality

C45PRO equipment is robust, reliable and designed to last in time. The high quality of the materials selected and the structural improvements developed guarantee maximum resistance to the daily stresses typical of workshop work.


Organization

A well-organised workplace allows you to work more efficiently, optimising working time. In addition, a tidy and well-kept workshop tells a lot about the way you work, conveying your passion and reliability to the customer.