Features:
• Sturdy PVC cover, waterproof
• Reinforcement seams around the entire perimeter
• Double clip buckle closure
• Double interior handle for a safe, balanced hold
• Zipped document pocket

Mobile roller cab with 7 drawers, with wood worktop and anti-tilt system, long model
Work surface increased by no less than 25%!
Long model with 7 fully removable drawers (882x367 mm), with ball bearing slides:
• 5 drawers, 70 mm high
• 1 drawer, 140 mm high
• 1 drawer, 210 mm high

• Multi-ply wood worktop with holes for a vice 1599F/100 or 1599GI/100 (to be ordered separately)
• Sturdy nylon front, with built-in label holder
• Drawer bases protected by foamed rubber mats
• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 1.100 kg
• Built-in side bottle holder (can be applied on both sides)
• Built-in paper roll holder
• Each drawer can accommodate up to 6 EVA foam or ABS thermoformed trays


Following accessories can be added:
• perforated tool panel with supports 2400 RSC24AXLP/PF
• computer bracket 2400 RSC24/SPC
• side tool tray 2400 RSC24AXLP/VL
• waste bin 2400 RSC24AXLP/CPR
• folding side shelf 2400 RSC24/MP
 105 kg

008620960 862XP/A16
 PH2(x2)-PH3
 PZ2(x2)-PZ3
 T20-T25(x2)
T30(x2)-T40(x2)
 4-5-6 mm

900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
96BPC/SC9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/16 adaptor, 1/4” female and 3/8” male drives  1/4 -  3/8 1
900/... 1/4” drive extension bar 50-100-150 mm 3
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
910A 3/8" hexagon hand sockets  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm 17
910/15 adaptor, 3/8” female and 1/4” male drivers  3/8 -  1/4 1
910/16 adaptor, 1/2" female and 3/8" male drives  3/8 -  1/2 1
910/21 3/8" extension bar 125 mm 1
910/22 3/8" extension bar 250 mm 1
910/25 3/8" drive universal joint 1
910/42 3/8" drive sliding T - handle 1
910/55 3/8" drive reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 17
920/15 adaptor, 1/2” female and 3/8” male drives  1/2 -  3/8 1
910/25 3/8" drive universal joint 1
920AN 1/2” wobble extension bar 125 - 250 mm 2
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
956E 3/8" square drive spark plug sockets  16-17,8-20,8 mm 3
910AL hexagon hand sockets  8-9-10-11-12-13-14-15-16-17-19-21-22 mm 13
920PE 1/2" socket drivers for hexagon screws  5-6-6L-7-8-8L-10-10L-12-12L mm 10
920FTX 1/2" sockets for Torx® head screws  E12-E14-E16-E18-E20-E22-E24 7
920TX 1/2” drive, socket drivers for Torx® head screws  T20-T25-T27-T30-T30L-T40-T40L-T45-T50-T50L-T55-T60-T60L 13
920XZN 1/2" socket drivers with XZN® profile  5-6-6L-8-8L-10-10L-12L mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32 mm 16
1692/5 measuring tape 5 m 1
42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-24-27 mm 18
90 double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm 7
123Q1/4 quick release adaptor, 1/4", for 10 mm ratcheting wrenches 1
123Q3/8 quick release adaptor, 3/8", for 13 mm ratcheting wrenches 1
123Q1/2 quick release adaptor, 1/2", for 19 mm ratcheting wrenches 1
142 reversible ratcheting combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
860MIX/A31 bits with magnetic quick release bit holder in plastic case      31
1048N slip joint pliers, slip-proof PVC coated handles 250 mm 1
1082BM Diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1162BM Extra-long flat knurled nose pliers  160 mm 1
1290 screwdrivers for cross head Phillips® screws  3x75-4x100-5,5x100-6,5x150-8x150 mm 5
1290N screwdriver for slotted head screws, extra-short series  6,5x30 mm 1
1292 screwdrivers for cross head Phillips® screws  4,5x80-6x100-8x150 mm 3
1292N screwdriver for cross head Phillips® screws, extra-short series  6x30 mm 1
1297TX drivers for Torx® head screws, with handles  T20-T25-T27-T30 4

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm 22
55 double open end wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm 8
96/SC9 offset hexagon key wrenches  1,5÷10 mm 9
867PE hexagon bits  4-5-6-7-8-10-12 mm 7
867PE/L hexagon bits  4-5-6-7-8-10-12 mm 7
867XZN bits with XZN® profile  5-6-8-10-12 mm 5
867XZN/L bits with XZN® profile  5-6-8-10-12 mm 5
867TX bits for Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867TX/L bits for Torx® head screws  T25-T30-T40-T45-T50-T55 6
867RTX bits for Tamper Resistant Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867/1 bit holder sockets for item 867 1
867/2 bit holder sockets for item 867 1
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/20 1/4” drive extension bar 50 mm 1
900/20L 1/4” drive extension bar 100 mm 1
900/21 1/4” drive extension bar 150 mm 1
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920/15 adaptor, 1/2” female and 3/8” male drives 1
920/25 1/2" drive universal joint 1
920AN/125 1/2” wobble extension bar 125 mm 1
920AN/250 1/2” wobble extension bar 250 mm 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
920FTX 1/2" sockets for Torx® head screws  10-12-14-16-18-20-22-24 mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22 11
1084BM Heavy-duty diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1166BM Extra-long needle nose pliers  160 mm 1
1201E screwdriver for slotted head screws  2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN screwdriver for slotted head screws,
extra-short series  4x30 mm 1
1202E screwdriver for cross head Phillips® screws  PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN screwdriver for cross head Phillips®
screws, extra-short series  PH1X30 mm 1
1207E/TX screwdrivers
for Torx® head screws, with handles  T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40-T45 12
1253 mains testing screwdriver  1
35 flat chisels, ribbed type 100-200 mm 2
1370 engineer’s hammer 300 g 1
1390 soft face hammer Ø 35 mm 1

42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32-36 mm 22
55 double open end wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm 8
96/SC9 offset hexagon key wrenches  1,5÷10 mm 9
867PE hexagon bits  4-5-6-7-8-10-12 mm 7
867PE/L hexagon bits  4-5-6-7-8-10-12 mm 7
867XZN bits with XZN® profile  5-6-8-10-12 mm 5
867XZN/L bits with XZN® profile  5-6-8-10-12 mm 5
867TX bits for Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867TX/L bits for Torx® head screws  T25-T30-T40-T45-T50-T55 6
867RTX bits for Tamper Resistant Torx® head screws  T20-T25-T30-T40-T45-T50-T55 7
867/1 bit holder sockets for item 867 1
867/2 bit holder sockets for item 867 1
895/1 socket holder 1
895/3 socket holder 1
895/6 socket holder 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/20 1/4” drive extension bar 50 mm 1
900/20L 1/4” drive extension bar 100 mm 1
900/21 1/4” drive extension bar 150 mm 1
900/25 1/4" drive universal joint 1
900BG/30 1/4" drive spinner handle 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920/15 adaptor, 1/2” female and 3/8” male drives 1
920/25 1/2" drive universal joint 1
920AN/125 1/2” wobble extension bar 125 mm 1
920AN/250 1/2” wobble extension bar 250 mm 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
920FTX 1/2" sockets for Torx® head screws  10-12-14-16-18-20-22-24 mm 8
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22 11
1084BM Heavy-duty diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1166BM Extra-long needle nose pliers  160 mm 1
1201E screwdriver for slotted head screws  2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN screwdriver for slotted head screws,
extra-short series  4x30 mm 1
1202E screwdriver for cross head Phillips® screws  PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN screwdriver for cross head Phillips®
screws, extra-short series  PH1X30 mm 1
1207E/TX screwdrivers
for Torx® head screws, with handles  T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40-T45 12
1253 mains testing screwdriver  1
35 flat chisels, ribbed type 100-200 mm 2
1370 engineer’s hammer 300 g 1
1390 soft face hammer Ø 35 mm 1

For precision jobs.
In compact anodized aluminium case.


 200 g
 130x60x35 mm -  200 g

C20L:  5,4 kg

Features:
• 3 tops covered in antislip ribbed rubber
• Ergonomic handle
• Two fixing options for central worktop
• Four castors Ø 100 mm:
• 2 fixed and 2 steering (1 with brake)
• Static load capacity: 200 kg (distributed between3 shelves)

016870150 1687/S4
set of 4 engineer's precision scribers, with handles
(items 1687A, 1687AC, 1687U, 1687D)
1687A-1687AC
1687D-1687U

BW 928A Hexagon hand sockets, 3/4"  22-24-27-30-32-34-36-38-41-46-50-55 mm 12
BW 928/55 Reversible ratchet, 3/4"  500 mm 1
BW 928/25 Universal joint - 3/4" 1
BW 928/20 Extension bar - 3/4" 100 mm 1
BW 928/21 Extension bar - 3/4" 200 mm 1
BW 928/42 3/4” drive slide T-handle,
chrome-plated 455 mm 1

Ideal for diagnostics
Useful and functional
Can be used as a mobile workstation for diagnostic tools, laptops, testers and battery chargers.


Specifications:
• Painted sheet metal frame: unparalleled firmness and sturdiness
• Ergonomic handle
• 2-level top
• Pull-out drawer for housing a mini keyboard
• 2 central shelves with adjustable position and 1 fixed low shelf
• 4 useful side cable reels made of plastic - 2 useful side containers
• 2 fixed rear castors Ø 160 mm
• 2 steering front castors Ø 100 mm (one with brake)
• Weight: 43 kg

• 8 drawers (588x367 mm),
with ball bearing slides:
7 drawers, 70 mm high
1 drawer, 210 mm high
• Drawer bases protected
by foamed rubber mats
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake)
• Front centralized safety lock
• Static load capacity: 800 kg
• Thermoplastic worktop
• Built-in side bottle holder


BW 1253 Mains testing screwdriver   0,5x100 mm 1
BW 42 Combination wrenches  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32 mm 22
BW 96BPC/SC9 Set of 9 ball head offset hexagon key wrenches   1,5-2-2,5-3-4-5-6-8-10 mm 9
BW 900 Hexagon hand sockets, 1/4"   4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900L Hexagon hand sockets, long series, 1/4"    4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900FTX Hand sockets for Torx® head screws, 1/4"    E4-E5-E6-E7-E8-E10 6
BW 900ME Socket drivers for hexagon screws, 1/4"    3-4-5-6-7-8 mm 6
BW 900TX Socket drivers
for Torx® head screws, 1/4"    T06-T07-T08-T09-T10-T15-T20-T25 8
BW 900LP Socket drivers for slotted head screws, 1/4"    0,8x4-1x5,5-1,2x6,5-1,2x8 mm 4
BW 900PH Socket drivers for
cross head
Philips® screws, 1/4"    PH0-PH1-PH2-PH3 4
BW 895/1 Socket holders
for items BW 861, BW 862, BW 866   1
BW 900/20 50 mm 1
BW 900/20L 100 mm 1
BW 900/25 Universal joint - 1/4" 1
BW 900/30 1/4" drive spinner handle 150 mm 1
BW 900/42 1/4” drive sliding T-handle 115 mm 1
BW 900/55 Reversible ratchet, 1/4"   150 mm 1
BW 910A Hexagon hand sockets, 3/8"    6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm 18
BW 910AL Hexagon hand sockets, long series, 3/8"    8-10-11-12-13-14-17-19 mm 8
BW 910FTX Hand sockets for Torx® head screws, 3/8"    E6-E7-E8-E10-E11-E12-E14 7
BW 910PE Socket drivers for hexagon screws, 3/8"    4-5-6-7-8-9-10 mm 7
BW 910TX Socket drivers for Torx® head screws, 3/8"    T15-T20-T25-T27-T30-T40-T45 7
BW 910/21  75 mm 1
BW 910/22  150 mm 1
BW 910/25 Universal joint, 3/8"  1
BW 920/15 Adaptor - F1/2"xM3/8"  1/2" -  3/8" 1
BW 1256/C21-1  4 mm 22
BW 55 Double open end wrenches  6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm 11
BW 90 Double ended deep offset ring wrenches  6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22-21x23-24x27-30x32 mm 11
BW 97TX/SC8 Set of 8 offset key wrenches,
for Torx® head screws,
burnished, with plastic support  T9-T10-T15-T20-T25-T27-T30-T40 8
BW 910/16F Adaptor - F3/8"xM1/2"  3/8" -  1/2" 1
BW 920A Hexagon hand sockets, 1/2"    8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32 mm 20
BW 920FTX Hand sockets for Torx® head screws, 1/2"    E10-E12-E14-E16-E18-E20-E22-E24 8
BW 920PE Socket drivers for hexagon screws, 1/2"    5-6-7-8-9-10-12-14 mm 8
BW 920PE-L Socket drivers for hexagon screws, long series, 1/2"    5-6-7-8-9-10-12-14 mm 8
BW 920TX Socket drivers for Torx® head screws, 1/2"    T27-T30-T40-T45-T50-T55-T60 7
BW 920TX-L Socket drivers for Torx® head screws, 1/2"    T30-T40-T45-T50-T55-T60-T70 7
BW 920AL Hexagon hand sockets, long series, 1/2"    10-12-13-14-15-16-17-18-19-21-22-24-27-30-32 mm 15
BW 920/21 Extension bar - 1/2" 125 mm 1
BW 920/22 Extension bar - 1/2" 250 mm 1
BW 920/25 Universal joint, 1/2" 1
BW 920/55 Reversible ratchet  260 mm 1
BW 1048 Slip joint pliers, boxed joints 250 mm 1
BW 1052 Adjustable self-locking pliers,
concave jaws 190-240 mm 2
BW 1082BM Diagonal cutting nippers   160 mm 1
BW 1098 Construction worker’s pincers 220 mm 1
BW 1128BMX Electrician's scissors,
stainless steel blades,
with microteeth 150 mm 1
BW 1150BM Heavy-duty combination pliers   180 mm 1
BW 1166BM Extra-long needle knurled nose pliers   200 mm 1
BW 1168BM Extra-long bent needle knurled nose pliers   200 mm 1
BW 30 Drift punches Ø 2-3-4 mm 3
BW 31 Pin punches Ø 2-3-4-5-6-8 mm 6
BW 32 Centre punches Ø 4 mm 1
BW 34 Flat chisels 150-175-200 mm 3
BW 36 Cape chisels 130 mm 1
BW 1370 Engineer's hammers  500 g 1
BW 1390 Soft face hammer, plastic faces Ø 35 mm 1
BW 1692/3 Measuring tapes 3 m 1
BW 1712T Telescopic magnet 1
BW 1719BMA8/Q Second-cut square files, with handles  200 mm 1
BW 1719BMA8/T Second-cut triangular files, with handles ▲ 200 mm 1
BW 1719BMA8/P Second-cut flat files, with handles ▌200 mm 1
BW 1719BMA8/M Second-cut half-round files, with handles  200 mm 1
BW 1719BMA8/R Second-cut round files, with handles  200 mm 1
BW 1737NX Brake shoe cleaning brush 270 mm 1
1201E Screwdrivers for slotted head screws   2,5x50-3x75-4x100-5,5x125-6,5x150-8x200 mm 6
1201EN Screwdrivers for slotted head screws   4x30 mm 1
1202E Screwdrivers for cross head Phillips® screws   PH0x60-PH1x80-PH2x100-PH3x150 mm 4
1202EN Screwdrivers for cross head Phillips® screws   PH1x30 mm 1
1207E/TX Evox screwdrivers for Torx® head screws   T06-T07-T08-T09-T10-T15-T20-T25-T27-T30-T40-T45 12
1032 Internal circlip pliers, straight pattern  19÷60 mm 1
1034 Internal circlip pliers, bent pattern  19÷60 mm 1
1036 External circlip pliers  19÷60 mm 1
1038 External circlip pliers, bent pattern  19÷60 mm 1
BW 861/C61 Set of 60 bits
with magnetic bit holder,
in pocket-size case      61
1771 1
BW 910/55 Reversible ratchet  205 mm 1
943E Hexagon nut spinners with handles  6-7-8-9-10-11-12-13 mm 8
BW 96T Offset hexagon key wrenches, with high torque handles 2-2,5-3-4-5-6-7-8 mm 8
BW 1149F Front wire stripping pliers, self-adjusting 175 mm 1
BW 1602 Crimping pliers
for insulated terminals 0,75÷6  mm² 1
BW 1603 Crimping pliers for non-insulated
terminals 1,25÷5,5  mm² 1
BW 1606T Crimping pliers for tubular terminals, 4-sided crimping 0.1÷10 mm² 1
BW 1608 Crimping pliers for insulated terminals,
with pressure regulator 0,5÷6  mm² 1
BW 141 Ratcheting combination wrenches 8-9-10-11-12-13-14-15-17-19 mm 10
BW 410/SP19 Set of rolled twist drills,
in plastic case Ø 1÷10 mm x 0.5 mm 19
BW 1725CR Mini hacksaw frame 260 mm 1
BW 97TTX Offset key wrenches with handles for Torx® head screws T8-T9-T10-T15-T20-T25-T27-T30-T40 9
BW 1682 Flexible graduated rules 300 mm 1
BW 1650 Sliding gauges 150 mm 1
BW 1380 Lump hammer 1000 g 1
BW 720 Impact sockets, 1/2"  10-12-13-15-17-19-21-24 mm 8
BW 720L Impact sockets, long series, 1/2"  17-19-21-22 mm 4
BW 720/21 125 mm 1
BW 900/16 Adaptor - 1/4"  1/4" -  3/8" 1
BW 910/15 Adaptor - F3/8" xM1/4  3/8" -  1/4" 1
BW 920/16 Adaptor - F1/2"xM3/4"  1/2" -  3/4" 1
BW 943FL Flexible hexagon nut spinners
with handles  6-7-8 mm 3
BW 1687D 153 mm 1
BW 1687U 153 mm 1
BW 1687A 153 mm 1
BW 1687AC 153 mm 1
BW 1725 Hacksaw frame 420 mm 1
BW 1833S High-brightness LED torch,
made of sturdy anodized aluminium,
up to 200 lumens 200 lumen 1

The evolution of the C24S roller cab!
Reinforced worktop and a wide range of dedicated accessories!
Available in 7 different colour combinations!
New ABS reinforced worktop, designed to support tool chests RSC22, RSC23, RSC23C and RSC23T.
Main features:
• 7 fully removable drawers (588x367 mm), with ball bearing slides:
5 drawers, 70 mm high
1 drawer, 140 mm high
1 drawer, 210 mm high
• Multi-purpose top with anti-fall edges and eight holes for accommodating screwdrivers
• Four castors Ø 125 mm:
2 fixed and 2 steering (one with brake).
• Front centralized safety lock.
• Static load capacity: 800 kg.
• Built-in bottle holder (can be applied on both sides).
• The following accessories can be added:
wood worktop 2400 RSC24/PL
perforated tool panel 2400 RSC24/PF
folding shelf 2400 RSC24/MP
computer wall bracket 2400 RSC24/SPC
document holder 2400 RSC24//PD (available in anthracite grey or black)
paper roll holder 2400 RSC24/PC (available in anthracite grey or black)
• Drawer bases protected by foamed rubber mats.
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays.

Clock complete with thermometer and hygrometer, 26 cm in diameter

For mechanics, industrial maintenance and car repair professionals as well as for anybody whose hobby is much more than just a diversion.

910AL hexagon hand sockets  8-9-10-11-12-13-14-15-16-17-19-21-22 mm 13
920AL hexagon hand sockets  10-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32 mm 16
920FTX 1/2" sockets for Torx® head screws  E12-E14-E16-E18-E20-E22-E24 7
920PE 1/2" socket drivers for hexagon screws  5-6-6L-7-8-8L-10-10L-12-12L mm 10
920TX 1/2” drive, socket drivers for Torx® head screws  T20-T25-T27-T30-T30L-T40-T40L-T45-T50-T50L-T55-T60-T60L 13
920XZN 1/2" socket drivers with XZN® profile  5-6-6-6L-8-8L-10-10L-12L mm 8
42 combination wrenches 6-7-8-9-10-11-12-13-14-15-16-17-18-19-21-22-24-27 mm 18
90 double ended offset ring wrenches 6x7-8x9-10x11-12x13-14x1516x17-18x19 mm 7
123Q1/4 quick release adaptor, 1/4", for 10 mm ratcheting wrenches 1
123Q3/8 quick release adaptor, 3/8", for 13 mm ratcheting wrenches 1
123Q1/2 quick release adaptor, 1/2", for 19 mm ratcheting wrenches 1
142 reversible ratcheting combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
96BPC/SC9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
895/1 socket holder 1/4-1/4 1
895/3 socket holder 1/4-3/8 1
895/6 socket holder 5/16-1/2 1
900 1/4" hexagon sockets  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
900L hexagon hand sockets, long series  5-6-7-8-9-10-11-12-13 mm 9
900LP 1/4" socket drivers for slotted head screws  0,8x4-1x5,5-1,2x6,51,2x8 mm 4
900ME 1/4" socket drivers for hexagon screws  3-4-5-6-7 mm 5
900PH 1/4" socket drivers for cross head Phillips® screws  PH1-PH2-PH3-PH4 4
900TX socket drivers for Torx® head screws  T10-T15-T20-T25-T27-T30-T40 7
900/16 adaptor, 1/4” female and 3/8” male drives 1/4-3/8 1
900/... 1/4” drive extension bar 50-100-150 mm 3
900/25 1/4" drive universal joint 1
900/42 1/4" drive swivel T-handle 1
900/55 1/4" reversible ratchet  1
900BG/30 1/4" drive spinner handle 1
910A 3/8" hexagon hand sockets  6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22 mm 17
910/15 adaptor, 3/8” female and 1/4” male drivers 3/8-1/4 1
910/16 adaptor, 1/2" female and 3/8" male drives 3/8-1/2 1
910/21 3/8" extension bar 125 mm 1
910/22 3/8" extension bar 250 mm 1
910/25 3/8" drive universal joint 1
910/42 3/8" drive sliding T - handle 1
910/55 3/8" drive reversible ratchet  1
920A 1/2" square drive hexagon sockets  8-1011-12-13-4-15-16-17-18-19-20-21-22-23-24-26-27-28-30-32 mm 21
920AN 1/2” wobble extension bar 125-250 mm 2
920/15 adaptor, 1/2” female and 3/8” male drives 1/2-3/8 1
920/25 1/2" drive universal joint 1
920/42 1/2" drive sliding T-handle 1
920/55 1/2" drive reversible ratchet  1
956E 3/8" square drive spark plug sockets  16-17,8-20,8 mm 3
860MIX/A31 bits with magnetic quick release bit holder in plastic case      31
1048N slip joint pliers, slip-proof PVC coated handles 250 mm 1
1082BM Diagonal cutting nippers  160 mm 1
1150BM combination pliers bright chrome-plated, bi-material handles  180 mm 1
1162BM Extra-long flat knurled nose pliers  160 mm 1
1290 screwdrivers for cross head Phillips® screws  3x75-4x100-5,5x100-6,5x150-8x150 mm 5
1290N screwdriver for slotted head screws, extra-short series  6,5x30 mm 1
1292 screwdrivers for cross head Phillips® screws  PH1-PH2-PH3 3
1292N screwdriver for cross head Phillips® screws, extra-short series  PH2 1
1297TX drivers for Torx® head screws, with handles  T20-T25-T27-T30 4
31 pin punches 2-3-4-5-6-8 mm 6
32 centre punch 4 mm 1
34 flat chisels 125-150-75 mm 3
36 cape chisels, standard type 125 mm 1
1370 engineer’s hammer 500-1000 g 2
1712TF telescopic magnet with flexible head 1
1390 soft face hammer Ø 35 mm 1
1692 measuring tape 5 m 1
1032 circlip pliers straight, internal  180 mm 1
1034 circlip pliers bent, internal  170 mm 1
1036 circlip pliers straight, external  175 mm 1
1038 circlip pliers bent, external  175 mm 1
1177BM smooth half - round long needle nose pliers  140 mm 1
1188BM diagonal cutting nippers  125 mm 1
1257LP micro-screwdrivers for slotted head screws  2,0-2,5-3,0-3,5 mm 4
1257PH micro-screwdrivers for cross-head Phillips® screws  0-00 2
97TTX drivers for Torx® head screws, with handles  T10-T15-T20-T25-T27-T30-T40-T45-T50 9
1052 self - locking pliers 240 mm 1
1058 adjustable self locking pliers, long jaws 175 mm 1
1481PL/A plastic hose pliers 1
1481PL/B plastic hose pliers 1
1481PL/C plastic hose pliers 1
1650 sliding gauge 1
1708/20 metric feeler gauge 1
1716P packing scraper 1
80 double swivel end socket wrenches 6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm 7
920/36A 1/2” drive swivel handle 1
965 pry bar with handle 450 mm 1
1715 telescopic joint inspection mirror 670 mm 1
1719BMA8/M second cut files 200 mm 1
1719BMA8/P second cut files 200 mm 1
1719BMA8/Q second cut files 200 mm 1
1719BMA8/R second cut files 200 mm 1
1719BMA8/T second cut files 200 mm 1
1737NX Steel wire brush 1

• Microprocessor for managing welding parameters
• Contact and manual welding cycle start
• Automatic spot welding time setting function
• Supplied with quick coupling gun and 2.2-m-long ground cable

Accessory kit contents:
• extractor hammer
• three-pointed washer head
• 10 three-pointed washers
• carbon electrode
• squashing electrode


Technical data:
• Power supply: 230V
• 50% power: 2.5 KVA
• Power peak: 13 KVA
• Amp output: 2850 (2%) A
• Max. Amp output : 3200 A
 kg 23

The wrench that does not require releasing tension after use. 100% Italian-made, it is ideal for controlled tightening of screws/bolts.


ZERO-RESET TECHNOLOGY: Based on higher-performance materials and improved heat treatment of both the spring and the component parts of the adjustment system, the wrench no longer requires releasing tension after use.
EASY SETTINGS: The graduated vernier scale allows minimum interval fractions to be set up (in tenths of Nm).
IMPROVED VISIBILITY: Double graduation in Nm for clearer, simpler torque visibility and easy, prompt settings.
PUSH-THROUGH RATCHET: 72 tooth mechanism, for quick, accurate wrench operation, ensuring a take-up angle of no more than 5°.
BI-MATERIAL HANDLE: Ergonomic handle, for a safe, comfortable hold. Made from materials resistant to fuel, oil and industrial liquids.
TORQUE LOCKING PUSH-PULL SYSTEM: Lock/release knob with high-visibility red ring in released position. Torque is set by rotating the handle.
CLICK MECHANISM: The mechanical click can be heard and touched.
100% ITALIAN-MADE: Entirely designed and manufactured in Italy, assembled, tested and certified at Beta's Dynalab, at our headquarters in Sovico, which translates into top-quality torque wrenches.

Professional manual pallet jack for handling differently sized pallets. The frame provides remarkable firmness and sturdiness, for intensive daily use.

Features:
• 2 steering wheels, 200x50 mm, made of PU
• double front rollers, 80x70 mm, made of PU
• pallet access entry and exit rollers
• depth stop notch
• lowering speed control valve
• safety overload valve
• 3-position operating lever


Technical data:
• maximum capacity: 2500 kg
• overall length: 1550 mm
• fork length: 1150 mm
• fork width: 540 mm
• individual fork width: 160 mm
• lever height: 1230 mm
• max. lifting height: 115 mm
• pallet storage corridor: 800x1200 lengthwise: 1805 mm
• turning radius: 1347 mm
 69,5 kg

A professional solution, ideal for light carpentry and maintenance jobs, the inverter welding machine, 1860BHT/160A, stands out as a first-rate item developed from the merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A.
This DC-powered inverter welding machine can be used for both MMA welding with rutilic, basic and stainless steel electrodes, and TIG steel welding.
Compact and lightweight, the welding machine supports the arc force, STICK/TIG (lift arc), hot start, anti-sticking and thermostatic protection features.


Features:
• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
35% - 160 A
60% - 130 A
100% - 95 A
• Protection: IP23S
• Usable electrodes: Ø 1.6 - 4 mm rutilic, basic, stainless steel.
• Supplied with 25 mm² cables
• Dimensions: 360x140x230 mm
• Welding machine weight: 6.2 kg
• Torch length: 4 m

Main features:
• LED charge level indicator
• Rated input voltage: 110V-240V ~ 50/60Hz
• Output voltage: 20V
• Charging current: 6A
• Rated input power: 145W

20V 2Ah battery charging time: 45 min
20V 4Ah battery charging time: 90 min
20V 6Ah battery charging time: 120 min

With button and 3 coloured LED charge level indicators.

Main features:
• Battery voltage: 20V
• Battery capacity: 2Ah
• Energy capacity: 40Wh
• Battery type: Li-ion

With button and 3 coloured LED charge level indicators.

Main features:
• Battery voltage: 20V
• Battery capacity: 4Ah
• Energy capacity: 80Wh
• Battery type: Li-ion

With button and 3 coloured LED charge level indicators.

Features:
• Battery voltage: 20V
• Battery capacity: 6Ah
• Energy capacity: 120Wh
• Battery type: Li-ion

Multifunctional audio entertainment: digital (DAB; BT) and conventional FM radio.
Suitable for use at construction sites or for leisure.

Features:
• Sturdy radio with compact, modern, design, degree of protection IP54
• Powerful stereo sound provided by two powerful 16W side loudspeakers
• Built-in alarm function
• Complete with carrying handle and shockproof corner protection
• With AUX connection and protected USB connector for phone connection and charge
• Can be used with Beta's 20V batteries (optional) or power supply cord (included).
• FM radio frequency range: 87.5 – 108 MHz
• DAB radio frequency range: 174 – 240 MHz
• Number of FM and DAB stored stations: 30
• Loudspeaker power: 16 W
• Rated voltage of battery (optional): 20 V
• Radio dimensions: 180 x 205 x 305 mm
• Radio weight (without battery): 3.2 kg

Specifications:
• Maximum capacity: 1 t
• 4 loading positions: 300-600-800-1000 kg
• With load limiting valve and chrome-plated stand
• Controlled descent speed
• Nylon wheels
• Maximum height: 2420 mm

Digital BRUSHLESS motor for increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Main features:
• Protection against accidental restart
• Additional handle, can be placed on both sides
• Tool-less disc cover (quick release)
• Spindle lock device for quick disc changes
• Lock on/off slide switch
• Air vents protected against dust infiltration and providing optimal cooling
• Supplied in a hard case with 2 4 Ah lithium ion batteries and a quick charger

Technical data:
• Disc diameter (not included): 125/115 mm
• Free speed: 8.000 rpm
• Tool spindle thread: M14
• Tangle-free cable length: 4 m

Digital BRUSHLESS motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 different torque settings and rpms in screwing mode
• Up to 600 Nm unscrewing torque
• 1/2" male square drive with bush retaining ring
• Gear case made entirely from metal
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)

Tightening
3 torque settings and rpms (low - medium - height) available):
1: 200 Nm; 1000 rpm
2: 350 Nm; 1500 rpm
3: 550 Nm; 1800 rpm

Untightening
1: 600 Nm: impact wrench applies maximum torque non-stop (free unscrewing)
2: 600 Nm - Autostop: impact wrench applies maximum torque until nut is fully unscrewed, and then stops automatically (single impact unscrewing)

Supplied in handy hard case complete with 2 lithium ion batteries (4 Ah) and quick charger.
Battery voltage 20 V
Battery capacity 4.0 Ah
Drive 1/2" square
Max. tightening torque (Nm) 200 / 350 / 550
Max. untightening torque (Nm) 600
Weight without battery 2.3 kg

Digital brushless motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case with 2 lithium ion batteries (4 Ah) and quick charger

Technical features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm

Workshop equipment Beta RSC50.
The new range of workshop equipment is characterised by attention to detail and refined finishes.

Comprehensive combination comprising:
• 1 single-door tool cabinet (RSC50 A1)
• 1 750-mm-long worktop (RSC50 PG/1-0,7MT)
• 1 2.240-mm-long worktop (RSC50 PG/3-2,2MT)
• 1 mobile roller cab with 7 drawers (RSC50 C7)
• 1 fixed module with 4 drawers (RSC50 M4)
• 1 fixed module with 7 drawers (RSC50 M7)
• 1 fixed service module (RSC50 MS-AVV) with compressed air hose reel item 1900S 8x10 (included)
• 1 tool wall system with aluminium shutter and framework (RSC50 PS)
• 2 wall-mounted cabinets (RSC50 PM)
• 2 upper perforated tool panels (RSC50 PFS)
• 2 lower perforated tool panels (RSC50 PFI)
• 2 pairs of right/left uprights (RSC50 P/2MDX-SX)
• 1 two-door tool cabinet (RSC50 A2)

Design and Quality Made in Italy

The new workshop equipment is designed and manufactured in Beta's Italian factories, with the utmost attention to detail and choice of quality materials. The new range comprises preassembled combinations, developed by Beta for professionals; alternatively, you can design your workplace on your own, choosing from many under-bench modules, wall-mounted cabinets and furnishing accessories.


Deep and sturdy work surface
New sturdy and very deep worktop (63 cm) for a large, comfortable and functional work surface. It can be fitted with a vice, thereby allowing heavy-duty jobs to be carried out.

Wide range of compatible assortments
The drawers in Beta’s standard dimensions (588x367 mm) can accomodate the numerous tool modules, which are available in both soft and hard versions, made from EVA and ABS respectively.

Customisable modules
The customized colours of the drawer handles and lights under the worktops and wall-mounted cabinets result in unique workshop equipment.

Simple, Quick Installation
RSC50 range’s modules have been conceived and designed so that they can be assembled intuitively and quickly. In fact, thanks to optimized production of the various parts of the range, assembly of the RSC50 equipment involves fewer steps than other lines of workshop equipment.

Beta C45PRO, the professional, sturdy, tidy workshop equipment.
Beta C45PRO is the new line of workshop equipment to organise the workstation in the best possible way according to the space available and the needs of use. The range includes predetermined combinations that can be modified and expanded over time according to requirements.

Combination comprising:

• 2 perforated tool panels (C45PRO PF)
• 2 wall-mounted cabinets (C45PRO PM)
• 2 wall brackets, wide type (C45PRO SL)
• 1 wall bracket, narrow type (C45PRO SS)
• 1 single-door cabinet (C45PRO AS1)

• Fixed module with 7 drawers and stainless steel coated MDF worktop (C45PRO M7A/X):
• 1 drawer, 1248x406 mm
• 6 drawers, 782x406 mm
5 drawers, 65 mm high
1 drawer, 145 mm high
• 1 storage compartment with intermediate shelf and door

Design

The C45PRO workshop equipment is characterised by the unique Beta style. The new colour, anthracite grey, the new matt finish, the new aluminium handle with orange insert and Beta's chrome plated logos make the C45PRO workshop equipment look modern and even more captivating.


Beta Quality

C45PRO equipment is robust, reliable and designed to last in time. The high quality of the materials selected and the structural improvements developed guarantee maximum resistance to the daily stresses typical of workshop work.


Organization

A well-organised workplace allows you to work more efficiently, optimising working time. In addition, a tidy and well-kept workshop tells a lot about the way you work, conveying your passion and reliability to the customer.

Beta C45PRO, the professional, sturdy, tidy workshop equipment.
Beta C45PRO is the new line of workshop equipment to organise the workstation in the best possible way according to the space available and the needs of use. The range includes predetermined combinations that can be modified and expanded over time according to requirements.

Combination comprising:
• 1 stainless steel coated MDF worktop (C45PX/3-2.0MT)
• 1 stainless steel coated MDF worktop (C45PX/2-1.3MT)
• Fixed two-door module (C45PRO MA)
• 1 mobile roller cab with 7 drawers (C45PRO C7)
• 1 fixed module with 7 drawers (C45PRO M7)
• 1 fixed module with 2 built-in reels (C45PRO ACT)
• 1 fixed service module (C45PRO MS)
• 1 self-supporting complete corner with stainless steel coated MDF worktop (C45PRO CORNER/X)
• 2 perforated tool panels (C45PRO PF)
• 1 perforated tool panel, con be fitted with a power socket (not included) (C45PRO PFE)
• 3 wall-mounted cabinets (C45PRO PM)
• 1 tool wall system with aluminium shutter (C45PRO PAS)
• 6 wall brackets, wide type (C45PRO SL)
• 4 wall brackets, narrow type (C45PRO SS)
• 2 single-door cabinets (C45PRO AS1)

Design

The C45PRO workshop equipment is characterised by the unique Beta style. The new colour, anthracite grey, the new matt finish, the new aluminium handle with orange insert and Beta's chrome plated logos make the C45PRO workshop equipment look modern and even more captivating.

Beta Quality

C45PRO equipment is robust, reliable and designed to last in time. The high quality of the materials selected and the structural improvements developed guarantee maximum resistance to the daily stresses typical of workshop work.

Organization

A well-organised workplace allows you to work more efficiently, optimising working time. In addition, a tidy and well-kept workshop tells a lot about the way you work, conveying your passion and reliability to the customer.

Innovative thru-axle locking system.

Features:
• With support for central movement, with safety pin
• Built-in wheel truing stand
• Innovative thru-axle locking system
• Supplied with adapter sockets for most forks
• Supplied with fork connection adapter without thru-axle


Firm, safe, compact workbench for bicycle assembly and maintenance.

Innovative thru-axle locking system.
Features:
• With support for central movement, with safety pin
• Tool drawer with ball bearing slides (490x365x90 mm)
• Built-in wheel truing stand
• Innovative thru-axle locking system
• Supplied with adapter sockets for most forks
• Supplied with fork connection adapter without thru-axle


Professional workbench for bicycle assembly and maintenance.
Large tool drawer allows everything to be always within reach.
Can be used with or without wheels on bicycle.
Firm, safe top for central movement.
Its weight (45 kg) provides both firmness and sturdiness.

Burnished Finish
Supplied in Plastic Clip
Set Contains 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm:

Contains:
1/4″ Drive hexagon sockets (900): 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
150mm extension bar (900/21).
Flexible universal joint (900/25).
Spinner handle (900BG/30).
Sliding T-handle (900/42).
1/4″ Drive ratchet (900/55).
Supplied in sturdy plastic case (Dimensions: 270 x 120 x 45mm).
Weight: 1kg.

000421074 42/B9N
Set of 9 combination wrenches (item 42)
in roll-up wallet made of durable polyester
6-7-8-10-11-13-14-17-19 mm

Length: 150mm.
3mm diammeter.
L1: 23mm.

Adjustable cutting depth: 5-25 mm.
Features:
• Blade retracts through an automatic spring mechanism
• Die-cast alloy body
• Staple remover built into handle

Precision 1 mm/m
Adjustable horizontal vial

Professional model.

Double mm-scale
Photo-engraved
Double mm-scale
Photo-engraved

Screw adjustment of stripping depth
V-shaped cutters

Set consists of:

x1 pair of Combination Pliers
x1 pair of Long Needle Nose Pliers
x1 pair of Diagonal Cutting Nippers
These Pliers have bi-material handles and an industrial finish.

Length: 330mm.
Face diameter: 28mm.
Weight: 694g.

012730851 1273MQ/D6 set of 6 screwdrivers (items 1274MQ, 1272MQ)
Fully insulated 1000V screwdriver set.
Slotted- 3×100, 4×100 & 5.5x125mm.
Phillips PH0x60, PH1x80 & PH2x100mm.

Marksman Mirror Polished 75Mm Scraper/Stripping Knife (3")

19Pc Hss Drill Bit Set 1Mm To 10Mm

Long Arm, Ball End Hex Key Set 9Pc

10-Piece Double Ended Power Bit Set Pz2

Dekton 8-Piece Assorted Screwdriver Set

Dekton Precision Screwdriver Set - 6Pc

The perfect tool for scooping up snow in the Winter and leaves in the Autumn / Winter months.
Length (Handle to Blade Tip): 135cm
Blade Size: 31.5 x 45.5cm
Scoop Depth: 12cm
Lightweight aluminium shaft
Foam soft grip on shaft to ensure comfort even in cold weather
Strong plastic D grip
Wide, tough plastic moulded blade
Metal edge for breaking and scraping ice

This ready mixed screenwash solution in a 5 litre plastic container. This screenwash is ideal for removing traffic film and road dirt without smearing. Used as supplied will give protection to -3.

Dewalt DCK266P2 18V Brushless Twin Pack With 2 x 5Ah Batteries, Charger & Case


This DeWalt Kit consists of the DeWalt DCD796 Compact Hammer Drill Driver featuring 2nd generation brushless technology for 30% more power than its predecessor the DCD795 and excellent efficiency. The overall length has been reduced to 174mm for an even more compact feel. Also included is the DCF887 Impact Driver which has 205nm of Torque, 28% more powerful than its predecessor the DCF886. Precision drive on speed 1 gives you more control on smaller screws. Comes with 2 x 5.0Ah Batteries, Charger and TOUGHSYSTEM Kitbox.

Features
DCD796 Compact Combi Hammer Drill

18V XR Li-Ion compact hammer drill driver featuring NEW 5.0Ah Li-Ion battery technology
Brushless Motor Technology for excellent efficiency
Ultra compact, lightweight design allows use in confined spaces
Two speed all metal transmission for increased runtime and longer tool life
Drill Driver and Hammer feature for multiple applications
15 position adjustable torque control for consistent screw driving into a variety of materials
Intelligent trigger design allows for total control of application
Improved ergonomic design with rubber grip over mould improving users comfort
Improved air flow to the motor for cooler electronics and incrreased power
3 position super bright LED light
Li-Ion battery packs allows for superior insertion and removal with state of charge indicator
Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster
DCF887 Impact Driver
High power Brushless motor outputting up to 205Nm of torque ensures heavy applications are completed quickly
Application control is achieved through 3 motor speeds and torque settings including 'PrecisionDrive'
'PrecisionDrive' mode offers additional control in screwdriving applications to avoid material and fastener damage
Super lightweight and compact the tool is very comfortable to use and fits in small spaces
3x LED "Halo" light ring offers excellent workpiece lighting
5.0Ah XR battery packs offer great runtime and compatability with all of your other 18V XR DeWalt Power Tools
1/4" (6.35mm) 'drop in' bit holder allows for quick, one handed fitment
Comes With
1 x DCD796 Compact Combi Hammer Drill
1 x DCF887 Impact Driver
2 x 5.0Ah XR Slide Batteries
1 x DCB115 Multi Voltage XR Charger
1 x Dewalt Case

Product Specifications
Part No: DCK266P2
Barcode: 5035048488645
DCD796 Compact Combi Hammer Drill
Voltage: 18v
Power Output (W): 460
Soft Application Max Torque (Nm): 27
Hard Application Max Torque (Nm): 70
Torque Settings: 15 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Delay / Base-mounted
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (XR)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2000
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-550
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm): 1.5-13.0
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 40
Impact Rate (BPM) High: 0-34000
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-9350
Overall Length (mm): 190
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.6
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.8
Brushless Motor: Yes
NOISE & VIBRATION
Sound Pressure Level (LpA): 89 dB (A)
Sound Power Level (LWA): 100 dB (A)
Sound Uncertainty (K): 3 dB (A)
Drilling Concrete Vibration Emission (ah): 11.5 m/s²
Drilling Concrete Vibration Uncertainty (K): 1.6 m/s²
Drilling Metal Vibration Emission (ah): <2.5 m/s²
Drilling Metal Vibration Uncertainty (K): 1.5 m/s²
DCF887 Impact Driver
Voltage: 18v
Max Torque (Nm): 205
Brake Type: Electric
LED Job Light: Yes / Triple
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (XR)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM): 0-3250
Standard Bolt Capacity: M4-M12
Max. Impacts Per Min (IPM): 0-3800
Driving Shank: 1/4" Hex
Overall Length (mm): 134
Net Weight (Kg) with 1.5/2Ah Batt: 1.3
Net Weight (Kg) with 3/4/5Ah Batt: 1.5
Brushless Motor: Yes
NOISE & VIBRATION
Sound Pressure Level (LpA): 96dB(A)
Sound Power Level (LWA): 107 dB(A)
Sound Uncertainty (K): 3 dB (A)
Vibration Emission (ah) (Using Max Capacity of Tool): 22.0 m/s²
Vibration Uncertainty (K): 2.1 m/s²

DeWALT DCF850E2T-GB 18V XR Brushless Impact Driver With 2x Powerstack Batteries

Discover the ultimate companion for professionals seeking durability and efficiency: the DeWALT DCF850E2T-GB 18V XR Brushless Impact Driver. Engineered for unparalleled power and speed, this impact driver is fueled by its 18V power supply and compact design, delivering exceptional performance across a variety of tasks. Equipped with a 1/4" HEX handle, LED lighting, and intuitive speed regulation via a touch panel, it offers universal adaptability for professionals like installers or carpenters who demand reliability and mobility. Experience the advantages of extended tool life, heightened efficiency, and reduced energy consumption, all while enjoying the comfort of work in confined spaces. With precise speed regulation for optimal results, this impact driver boasts 2 gears plus an additional mode, rotational speeds ranging from 0-1500 to 3800/min, and a maximum impact frequency of up to 0-4500 beats/min. Elevate your craftsmanship with the DeWALT DCF850E2T-GB – where performance meets perfection.

Features
18V battery power supply : Enables convenient operation without the limitations of a cable.
Brushless motor : Provides longer tool life and higher work efficiency.
Compact design : Makes it easier to work in confined spaces.
1/4" HEX work holder : Quick and easy bit replacement.
Adjustable LED lighting : Possibility to adjust the light intensity.
multi-point, ring LED lighting : significantly improves comfort in the workplace and visibility of the screw, drill or bit.
Speed control in the panel : Allows precise control of modes (low/medium/high).
Version with power supply kit : Supplied with two batteries and a charger in a TSTAK case.
Specification
Motor type: Brushless motor
Power supply: rechargeable
Supply voltage: 18V
Series: Dewalt 18V
Batteries included: 2
Number of gears: 2 gears + additional mode
Rotational speed: 0-1500/3800/3300/min
Maximum impact frequency: 0-4500/min
Maximum torque: - Nm

Standard Equipment

1x DeWalt DCF850E2T-GB 18V XR Brushless Impact Driver
2x DeWALT DCBP034-XJ 18V XR Compact Powerstack Battery Pack
1x DeWALT DCB1102 18V XR Compact Powerstack Charger
1x DeWALT TSTAK Carry Case

Warranty

1 year

Dewalt DCS382N 18v XR Brushless Reciprocating Saw Bare Unit


DEWALT Brushless Motor for extended run-time, reliability & durability
Twist action keyless blade clamp for quick and easy blade change
Two position blade clamp allows for flush cutting and increased versatility
Pivoting shoe allows for more comfortable cutting stance
Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
Improved ergonomic design
Ergonomic handle and rubber overmould provide ultimate end user comfort
LED light for improved visibility of cut line and work piece

No-Load Speed - 0-3200rpm
MWO - 880W
Stroke Length - 28.6mm
Vibration (Cutting Board) - 15.1m/s²
Vibration (Cutting Beam) - 15.6m/s²

DEWDCE530N DCE530N XR Cordless Heat Gun 18V Bare Unit


DeWalt DCE530N 18V XR Heat Gun (Body Only)


The DeWalt DCE530N 18V XR Cordless Heat Gun is a must have tool for a wide range of applications on site such as shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts and many more. The heat gun features a compact size, 2 temperature settings with a low of 290° and maximum of 530°C, to allow for maximum versatility in applications. A lock-on switch improves comfort on longer jobs and allows for hands-free use. The lock-off switch prevents an accidental start-up during transportation and storage, reducing the risk of thermal accidents. The heat gun is compatible with all 18V XR batteries

Features:
Reaches a temperature of 530°C on a high setting and 290°C on a low setting.
A built-in LED light illuminates the workplace and improves visibility in small, confined spaces.
Fully compatible with all DeWalt 18v XR batteries.
Keep the tool switched on using the lock-on button to improve comfort for longer applications and hands-free use.
The trigger with a built-in lock-off switch prevents an accidental start-up during transportation and storage, reducing risk of thermal accidents.
Improving comfort for longer applications and the side air vents expel hot air from the sides to reduce any risk of over-heating.
Specifications:
Voltage: 18v
Temperature: 290-530 °C
Airflow: 109-190 l/min
Integrated LED Light: Yes
Lock-On-Switch: Yes
Length: 160 mm
Width: 200 mm
Height: 55 mm
Weight: 0.5 kg

In The Box:
1 x DCE530N Heat Gun Body Only
1 x Reflector Nozzle
1 x Surface Nozzle

GYS Front Cover Lense 114x133 mm (Pack Of 10)

Letter set contains - 27 pieces consisting A to Z Letter Size: 6in

Letter set contains - 27 pieces consisting A to Z Letter Size: 4in

Letter set contains - 27 pieces consisting A to Z Letter Size: 3in

Letter set contains - 27 pieces consisting A to Z Letter Size: 2in Supplied in a wallet.

1 x Set of Brass Interlocking Stencils - Letters 2in

Letter set contains - 27 pieces consisting A to Z. Letter Size: 2 1/2in

Letter set contains - 27 pieces consisting A to Z. Letter Size: 2in

Letter set contains - 27 pieces consisting A to Z Letter Size: 1in Supplied in a wallet.

1 x Set of Brass Interlocking Stencils - Letters 1in

Letter set contains - 27 pieces consisting A to Z. Letter Size: 1 1/2in.

Letter set contains - 27 pieces consisting A to Z. Letter Size: 1in.

Number set contains 9 pieces with the 6 being reversible for 9. Size: 6in Figures.

Number set contains 9 pieces with the 6 being reversible for 9. Size: 4in

Number set contains 9 pieces with the 6 being reversible for 9. Size: 3in Figures.

Number set contains 9 pieces with the 6 being reversible for 9. Letter Size: 2in Supplied in a wallet.

1 x Set of Brass Interlocking Stencils - Figures 2in

Number set contains 9 pieces with the 6 being reversible for 9. Size: 2 1/2in Figures.

Number set contains 9 pieces with the 6 being reversible for 9. Size: 2in Figures.

Number set contains 9 pieces with the 6 being reversible for 9. Letter Size: 1in Supplied in a wallet.

1 x Set of Brass Interlocking Stencils - Figures 1in

Number set contains 9 pieces with the 6 being reversible for 9. Size: 1 1/2in Figures.

Number set contains 9pieces with the 6 being reversible for 9. Size: 1in

Scan Assorted Hypoallergenic Fabric Plasters, safe for people with sensitive skin. They have a strong adhesion with a non-stick cushioned pad, sterile and individually wrapped. 120 supplied in a white plastic first aid box. Suitable for all types of small wounds in various shapes and sizes.

Scan Assorted Hypoallergenic Blue Plasters, safe for people with sensitive skin. Waterproof with a strong adhesive, keeping them secure. They are also metal detectable, making them safe for food production facilities. 120 supplied in a blue plastic first aid box. For use in restaurants, hotels, takeaways and medical environments.

Scan Reliwash saline eye wash is sterile and for irrigating eyes in an emergency situation. Size: 500ml. 1 bottle supplied.

Scan 45 Piece Household Burns First Aid Kit in weatherproof 4 pocket travel bag with handle and belt clips. Ideal for use in the home and outdoors. Suitable for burns, grazes, cuts and much more. Contents: 2 x Burn Relief Dressings (1 of each size): 2.5 x 5, 10 x 10cm2 x Burn Blot Sachet 3.5g1 x Sterile Medium HSE Dressing 12 x 12cm (unboxed)10 x Assorted Clear Washproof Plasters1 x Microporous Tape 1.25cm x 1m1 x Finger Dressing with Adhesive Fixing 3.5cm1 x Single Use Triangular bandage 90 x 127cm3 x Sterile Low Adherent Dressing Pads: 5 x 5cm(x2), 7.5 x 7.5cm(x1), 10 x 10cm(x1)1 x Conforming Bandage 5cm x 4m2 x Sterile Dressings (1 of each size): 5 x 7.5, 7.5 x 10cm2 x Single Pods Eye Wash20ml6 x Assorted Safety Pins4 x Singled Packed Sterile Moist Saline Cleansing Wipes1 x Pair of Stainless Steel Nurses Scissors 5in1 x Pair of Vinyl Powder-free Gloves (Medium)1 x Rebreath Mouth to Mouth Resuscitation Device with Valve1 x First Aid Guidance Leaflet

Scan Eye Wash Station supplied in a compact 'briefcase' style eye wash kit box can be wall-mounted. The saline eye wash is sterile and for irrigating eyes in an emergency situation. Contains: 2 x Reliwash Saline Eye Wash 500ml2 x No.16 Sterile Eye Pad Wound Dressing2 x Eye Wash Pods

Scan General-Purpose First Aid Kit supplied in a compact, polycarbonate briefcase style box. Suitable for travel, leisure and general domestic use. Supplied with a wall hanging bracket. Contains: 1 x Tubular Bandage 1m Applicator10 x AssortedAdvanced Fabric Plasters1 xSterile Medium HSE Dressing 12 x 12cm (unboxed)10 x Assorted Clear Washproof Plasters1 x Single Use Triangular bandage 90 x 127cm1 x Microporous Tape 1.25cm x 1m1 x Conforming Bandage 5cm x 4m2 x Sterile Low Adherent Dressing Pads 5 x 5cm1 x Eye Bath1 x Pair of Non Sterile Plastic Forceps 4.5in6 x Assorted Safety Pins3 x Singled Packed Sterile Moist Saline Cleansing Wipes1 x Pair of Vinyl Powder-free Gloves (Medium)1 x First Aid Guidance Leaflet

This Scan First Aid Kit comes in a compact 'briefcase' style kit box made of polycarbonate. Inculdes sufficient content to safeguard 1-25 persons in a workplace. Approved by the British Standards Institute. Contains: 1 x CoolTherm Burn Relief Dressing 10 x 10cm2 x Single Use Triangular Bandages 90 x 127cm40 x Assorted Waterproof Plasters2 x Medium Sterile HSE Dressings 12 x 12cm (unboxed)2 x Large Sterile HSE Dressings 18 x 18cm (unboxed)1 x Conforming Bandage 7.5cm x 4m1 x Finger Dressing with Adhesive Fixing 3.5cm2 x SterileEye Pad Dressing no.16 with Bandage (Flow Wrapped)1 x Microporous Tape 2.5cm x 5m20 x Cleansing Wipes1 x Pair of Small Universal Shears 6in1 x Adult Sized Foil Blanket 130 x 210cm6 x Pairs ofNitrile Gloves1 x Rebreath Mouth to Mouth Resuscitation Device with Valve1 x First Aid Guidance Leaflet

This Scan First Aid Kit comes in a compact 'briefcase' style kit box made of polycarbonate. Inculdes sufficient content to safeguard 1-100 persons in a workplace. Approved by the British Standards Institute. Contains: 2 x CoolTherm Burn Relief Dressings 10 x 10cm3 x Single Use Triangular Bandages 90 x 127cm60 x Assorted Waterproof Plasters4 x Medium Sterile HSE Dressings 12 x 12cm (unboxed)3 x Large Sterile HSE Dressings 18 x 18cm (unboxed)2 x Conforming Bandages 7.5cm x 4m3 x Finger Dressing with Adhesive Fixing 3.5cm3 x Sterile Eye Pad Dressing no.16 with Bandage (Flow Wrapped)2 x Microporous Tapes 2.5cm x 5m30 x Cleansing Wipes1 x Pair of Small Universal Shears 6in2 x Adult Sized Foil Blankets 130 x 210cm9 x Pairs of Nitrile Gloves1 x Rebreath Mouth to Mouth Resuscitation Device with Valve1 x First Aid Guidance Leaflet

This SCA9417 Letter Stencil Kit has characters with a height of 300mm (12in)

This Scan Number Stencil Kit contains the numbers 0-9 The SCA9416 Number Stencil Kit has numbers which are 300mm in height.

The SCA9406 Letter Number Stencil Kit has characters of 100mm (4in) in height.

The SCA9404 Letter Number Stencil Kit has characters of 50mm (2in) in height.

The SCA9403 Letter Number Stencil Kit has characters of 25mm (1in) in height.

This SCAN Sign is made from 1mm thick, durable PVC. It's aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. Printed with UV resistant inks, which resist fading. It is easy to read with clear instruction and illustration. Complies with BS5499 and/or ISO 7010 design criteria where applicable. Helps limit company liability should accident occur. Specification: Size: 400 x 600mmMessage: Details on how to treat an electric shock casualty

This Scan 'Fire extinguisher composite' safety sign is for Carbon Dioxide (CO2) extinguishers, and measures 75 x 200mm. It is printed on 1.3mm thick, rigid material with UV resistant inks to prevent fading. The sign is photoluminescent, which means that it will glow in the dark. The PVC sign is self-adhesive, making it easy to attach to any wall. It is perfect for alerting people to and providing guidance on the uses of CO2 fire extinguishers. The sign exceeds PSPA Class 1 classification. It is non toxic and non radioactive with no lead of phosphorous. Complies with BS5499 and/or ISO7010 design criteria where applicable. Helps limit company liability should an accident occur.

This Kidde KSPD2G multi-purpose 2kg fire extinguisher is designed for use on small domestic fires before they get out of control and without taking unnecessary risks. A fire extinguishers rating is the measure of its firefighting capability, and for domestic purposes, an ABC-rated extinguisher is recommended because it can be used on most types of fire common to the home or vehicle. It is also safe for use on electrical fires.This extinguisher has a pressure gauge for added reassurance it is fully charged, and ready to use. A mounting bracket is included as standard. It is fully certified to the European standard EN3 and is 13A 89BC fire rated.Fire Ratings;A = wood, paper, textilesB = petrol, oils and paintsC = flammable gases The KIDKSPD2G has the following specifications.Fire Rating 13A 89BC.Extinguishing Agent 2kg dry powder (Ammonium Biphosphate and Ammonium Sulphate).Discharge Range 4m.Discharge Duration 10 sec.Temperature Range -30?C to 60?C.Propellant 15 bar nitrogen.Pressure Gauge Yes.Mounting Bracket Included as standard.Warranty 6 years.Unit Dimensions (boxed) 330mm x 158mm x 115mm.Unit Weight (boxed) 3.7kg.

The Kidde Multipurpose Dry Powder Fire Extinguisher is ideal for use on most types of small domestic or vehicle fires. The pressure gauge confirms that the extinguisher is ready to use (when the needle is in the green zone). It has an 8 second discharge and 4m range. BS EN3 Fire Rating 8A 34BC - safe for use on electrical fires, CE Tested and certified. For use with A, B or C category fires.A: Wood, paperB: Flammable liquids, petrolC: Gaseous fires

The Kidde FB1 Fire Blanket can be used on fat-pan fires in the kitchen, where it would not be recommended to use a fire extinguisher due the potential risk of spreading the burning fat or oil. A fire blanket should be present in all homes and is an essential fire safety product. It has an easy, wall-mountable design. Can also be used to wrap around a person whose clothing has caught alight. BAFE BS EN-1869 Approved. 5 Year Cloth Guarantee.